iDRAC with Lifecycle Controller 4.20.20.20
Installeret Denne fil blev automatisk installeret som en del af en nylig opdatering. Hvis du oplever problemer, kan du downloade og geninstallere manuelt.Indholdet på denne side er muligvis blevet oversat automatisk. Udfyld formularen nederst på siden for at give feedback.
iDRAC with Lifecycle Controller 4.20.20.20
Anbefalet
Tjek kompatibilitet
Indtast produktoplysningerne for at få vist de seneste driveroplysninger for dit systemIndtast din Dell-servicekode eller -model
Vil du søge efter dit produkt? Indtast et produkt-id. Vis mig hvordan
Denne driver er ikke kompatibel
Denne driver er ikke relevant for det valgte produkt. Vælg et andet produkt for at indtaste dine produktoplysninger for denne driver igen, eller gå til siden Produktsupport for at se alle drivere til et andet produkt.
Log på Windows som administrator for at bruge automatisk scanning. Hvis du allerede er logget på som administrator og får vist denne meddelelse, skal du genstarte enheden. Dit system administreres af din it-administrator, og funktionaliteten kan være begrænset.
Find flere opdateringer. Brug SupportAssist til at finde alle de seneste driveropdateringer til din enhed.
Programrettelser og forbedringer
To apply this version of firmware, the iDRAC must be at firmware version 3.30.30.30 or newer.
Fixes
- Fixed an issue of firmware crash after enable NPAR+SRIOV+RDMA with 8 VF's on each port.
- Fixed an issue of WSMAN invoke failing with ReturnValue=2.
- Fixed an issue of Redfish GET operation on multiple redfish URIs failing with 500 Internal error.
- Fixed an issue of iDRAC is triggering for a reboot by watchdog while collecting support assist logs.
- Fixed an issue of Local file inclusion in GUI.
- Fixed an issue of Hardcoded EC keys removal.
- Fixed an issue of Static IP not able to reach network on Dedicated mode.
- Fixed an issue of Windows DUP Update.
- Fixed an issue of incorrect naming of backplane ports.
- Fixed an issue of iDRAC firmware reboot after updating to iDRAC 4.10.10.10.
- Fixed an issue where iDRAC is not communicating with Management Module during Quick Deploy.
- Fixed an issue with N425G OCP cards where iDRAC NIC port was becoming inaccessible.
- Fixed an issue of intermittent IPMI socket permissions preventing other iDRAC internal components from sending commands to IPMI.
- Fixed an issue Error code 12587 generated while clearing users.
- Fixed an issue of 53 mm 660W PSU(DPN 5KHFC) having the wrong EPR value.
- Fixed an issue of TSR system information being shown empty after launching viewer.html.
- Fixed an issue of observing multiple critical logs with Broadcom OCP3 Network card.
Enhancements
- Support for 2 new GPU cards to the Precision 7920 Rack (Navi10DT/W5700, Navi14DT/W5500).
- Support for 1100W -48V DC PSU.
- Support for Redfish 2018R3, 2019R1 & 2019R2 Features.
- Support of CLI method to retrieve POST codes.
- Support for Samsung NVMe PM 1735 PCIe storage.
- Support for Thermal Sensor Board Cable Detection when C6420 chassis with one or more sleds is powered up.
- Support for LDAP test feature for ICMP check.
- Support for Report Interval limit on TelemetryCUPS to be increased from 1 minute to 1 hour in Power Manager Plug-in.
- Support for NVDIA V100S for PowerEdge.
- Support for MX 25G Quad port on MX.
- Support for Telemetry (Metric Report Enable/ Disable).
- Support for displaying Slot number in the SLED GUI for 6420.
- Support for enhanced user logging with SSH.
- Remove 4S PSU restriction.
- Support (4x 10/25 SFP28) OCP 3.0 Dell part # JTK7F - Broadcom.
- Support (4x10/25) MX Mezz, Dell part # DCWFP - Broadcom.
- Support for adding tier specification flag to PCI Add IPMI command.
- Support for Intel Optane for an Attribute Data Registry flow on AC loss or Global Reset.
- Support for adding Broadcom 10GbE NIC card support to R340.
- Support for 10x2.5" Backplane/chassis part number change.
- Support for enabling "Unsupported Config" SEL log.
- Support for latest OS and Browsers.
- Support for new Intel processors 6250 and 6256.
Læs mereFixes
- Fixed an issue of firmware crash after enable NPAR+SRIOV+RDMA with 8 VF's on each port.
- Fixed an issue of WSMAN invoke failing with ReturnValue=2.
- Fixed an issue of Redfish GET operation on multiple redfish URIs failing with 500 Internal error.
- Fixed an issue of iDRAC is triggering for a reboot by watchdog while collecting support assist logs.
- Fixed an issue of Local file inclusion in GUI.
- Fixed an issue of Hardcoded EC keys removal.
- Fixed an issue of Static IP not able to reach network on Dedicated mode.
- Fixed an issue of Windows DUP Update.
- Fixed an issue of incorrect naming of backplane ports.
- Fixed an issue of iDRAC firmware reboot after updating to iDRAC 4.10.10.10.
- Fixed an issue where iDRAC is not communicating with Management Module during Quick Deploy.
- Fixed an issue with N425G OCP cards where iDRAC NIC port was becoming inaccessible.
- Fixed an issue of intermittent IPMI socket permissions preventing other iDRAC internal components from sending commands to IPMI.
- Fixed an issue Error code 12587 generated while clearing users.
- Fixed an issue of 53 mm 660W PSU(DPN 5KHFC) having the wrong EPR value.
- Fixed an issue of TSR system information being shown empty after launching viewer.html.
- Fixed an issue of observing multiple critical logs with Broadcom OCP3 Network card.
Enhancements
- Support for 2 new GPU cards to the Precision 7920 Rack (Navi10DT/W5700, Navi14DT/W5500).
- Support for 1100W -48V DC PSU.
- Support for Redfish 2018R3, 2019R1 & 2019R2 Features.
- Support of CLI method to retrieve POST codes.
- Support for Samsung NVMe PM 1735 PCIe storage.
- Support for Thermal Sensor Board Cable Detection when C6420 chassis with one or more sleds is powered up.
- Support for LDAP test feature for ICMP check.
- Support for Report Interval limit on TelemetryCUPS to be increased from 1 minute to 1 hour in Power Manager Plug-in.
- Support for NVDIA V100S for PowerEdge.
- Support for MX 25G Quad port on MX.
- Support for Telemetry (Metric Report Enable/ Disable).
- Support for displaying Slot number in the SLED GUI for 6420.
- Support for enhanced user logging with SSH.
- Remove 4S PSU restriction.
- Support (4x 10/25 SFP28) OCP 3.0 Dell part # JTK7F - Broadcom.
- Support (4x10/25) MX Mezz, Dell part # DCWFP - Broadcom.
- Support for adding tier specification flag to PCI Add IPMI command.
- Support for Intel Optane for an Attribute Data Registry flow on AC loss or Global Reset.
- Support for adding Broadcom 10GbE NIC card support to R340.
- Support for 10x2.5" Backplane/chassis part number change.
- Support for enabling "Unsupported Config" SEL log.
- Support for latest OS and Browsers.
- Support for new Intel processors 6250 and 6256.
Version
4.20.20.20, A00
Udgivelsesdato
08 jul. 2020
Downloadtype
Firmware
Kategori
iDRAC med Lifecycle-controller
Vigtighed
AnbefaletDell Technologies anbefaler, at denne opdatering installeres under den næste planlagte opdateringscyklus. Opdateringen indeholder ændringer, der skal opretholde systemets generelle tilstand. Den sørger for, at systemsoftwaren forbliver opdateret og kompatibel med andre systemmoduler (firmware, BIOS, drivere og software) og kan indeholde andre nye funktioner.
Tilgængelige formater
Filformat: Opdateringspakke til MS Windows 64-bit.
Filnavn: iDRAC-with-Lifecycle-Controller_Firmware_369M3_WN64_4.20.20.20_A00_01.EXE
Filstørrelse: 158.47 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dell Update Packages i Microsoft Windows 64-bit standardformat kræver ikke, at Microsoft WOW64 skal være installeret på Microsoft Windows Server.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
79e2b3988ba388923d223175f62fd6c1
SHA1:
ca068d17fb49da1cce21401c797b1dbdc15e93b8
SHA-256:
27880cd2619a290b8d7c93175259f8abbbb9e5325a635f083e0c438b0fd75732
Filformat: Et program
Filnavn: iDRAC_4.20.20.20_A00.exe
Filstørrelse: 147.37 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Anvendelse
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
f3a663ef280fc50d5d693aad706af9f3
SHA1:
a6db86448f721beb880fee1040127b96db206ab7
SHA-256:
d9c7fbe961ead64a3b898a784f113844c6935b50bd806c9e59871927edd05fa2
Filformat: En GnuPG-fil, der indeholder en kryptografisk signatur
Filnavn: iDRAC-with-Lifecycle-Controller_Firmware_369M3_LN_4.20.20.20_A00_01.BIN.sign
Filstørrelse: 226 Bytes
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
GnuPG-signaturen til Red Hat Linux Update Package kan bruges til at godkende Dells identitet i den samlede Red Hat Linux Update-pakke.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
e2169a64d576e150479177b5de05c6fb
SHA1:
c32fb0ac314bbccb8a11ca72ae1e62d9a42df916
SHA-256:
c2c80f54503309cab7f88049567045eebc3b9a13f59ab35b34e7aa077433be6f
Filformat: Et arkiv med PDF-filer, der indeholder hjælp og fremgangsmåder til kunderne
Filnavn: iDRAC_4.20.20.20_ReleaseNotes_A00.pdf
Filstørrelse: 132.57 KB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dette format består af et arkiv med PDF-filer, der bruges til at give hjælp og fremgangsmåder til kunderne. Du skal installere Adobe Acrobat Reader for at få vist filerne i denne arkiv.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
d99dda0e139a5e2ff7743d7e72db8f3b
SHA1:
f905fbe9a03063e14f914bfa2ac5cfc1e6173ce1
SHA-256:
394a94c0fe44f437acbc57de30cbd5c2510c2482ae8fdf20e5346ea2b87060ca
Filformat: Eksterne produktbemærkninger
Filnavn: iDRAC_4.20.20.20_ReleaseNotes_A00.txt
Filstørrelse: 446 Bytes
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dette filformat indeholder almindelig tekst, som kan vises med en standardteksteditor.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
ca0e95c8339e80d80748167be590fe05
SHA1:
0d13f56f7387601a7d22032babf54e5e25e573fe
SHA-256:
ba5acf4628427792a939793f99b3890bd3171844bf2712d66c2a48454c4ce308
Filformat: Opdateringspakke til Red Hat Linux
Filnavn: iDRAC-with-Lifecycle-Controller_Firmware_369M3_LN_4.20.20.20_A00_01.BIN
Filstørrelse: 152.78 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dell Update Packages til Linux kan bruges som et selvstændigt program der sikrer, at specifikke valideringskriterier opfyldes, før opdateringen anvendes.
Bemærk: Opdateringspakker til Linux er open-source. Se Vigtigt-filen Dell Update Packages til Linux for at få flere oplysninger.
Bemærk: Opdateringspakker til Linux er open-source. Se Vigtigt-filen Dell Update Packages til Linux for at få flere oplysninger.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
f75678ac2cfe007678f4794e06dd7868
SHA1:
19e03b0ea3e4f7c08f7bc68c25b68adec87934f9
SHA-256:
51f9161ec3102bfa1e5da61554041e1bb35d099d6a3aed798b2a364db4e2c370
Når du downloader filerne, accepterer du samtidig betingelserne i Dells softwarelicensaftale. (på engelsk)
Understøttede operativsystemer
Ikke relevant
Gælder for
iDRAC with Lifecycle Controller
INFO,IDRAC LOCK,R240XL,SEPFY22
INFO,IDRAC LOCK,R340XL,SEPFY22
INFO,IDRAC LOCK,R640XL,SEPFY22
INFO,IDRAC LOCK,R740XL,SEPFY22
INFO,IDRAC LOCK,T640XL,SEPFY22
INFO,IDRAC,LCK,FW,4.20.20.20
INFO,IDRACLOCK,R740XDXL,Q3FY22
Installationsvejledning
Download
1. Click Download Now to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update
1. Click Download Now to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update
Hjælp og selvstudier til drivere
Du kan finde flere downloads på Drivere og overførsler. Hvis du har brug for hjælp til at bruge oplysningerne på denne side, kan du besøge Hjælp og selvstudier til drivere.