Du må ikke slukke for din computer eller fjerne strømkablet, når BIOS'en opdateres, da det kan beskadige din computer. I forbindelse med opdateringen genstartes din computer, og der vises eventuelt kortvarigt en sort skærm.
Før du opdaterer, skal du læse installationsvejledningen og de vigtige oplysninger, der er angivet nedenfor.
Dell Latitude C600 System BIOS, A22
Installeret Denne fil blev automatisk installeret som en del af en nylig opdatering. Hvis du oplever problemer, kan du downloade og geninstallere manuelt.Indholdet på denne side er muligvis blevet oversat automatisk. Udfyld formularen nederst på siden for at give feedback.
Latitude C500 / C600 FlashBIOS Version A22
Anbefalet
Tjek kompatibilitet
Indtast produktoplysningerne for at få vist de seneste driveroplysninger for dit systemIndtast din Dell-servicekode eller -model
Vil du søge efter dit produkt? Indtast et produkt-id. Vis mig hvordan
Denne driver er ikke kompatibel
Denne driver er ikke relevant for det valgte produkt. Vælg et andet produkt for at indtaste dine produktoplysninger for denne driver igen, eller gå til siden Produktsupport for at se alle drivere til et andet produkt.
Log på Windows som administrator for at bruge automatisk scanning. Hvis du allerede er logget på som administrator og får vist denne meddelelse, skal du genstarte enheden. Dit system administreres af din it-administrator, og funktionaliteten kan være begrænset.
Find flere opdateringer. Brug SupportAssist til at finde alle de seneste driveropdateringer til din enhed.
Programrettelser og forbedringer
The following updates were made to the A21 BIOS to create A22:
Issues Fixed:
1. Fixed issue in which ISA devices could not be manually reconfigured to use IRQ 10 in Device Manager.
2. Fixed issue in which some bootable CDs do not boot.
3. Fixed issue in which the system may hang or unexpectedly reboot with Boot Speed set to Compatible and USB Legacy enabled.
4. Improved accuracy of the battery discharge rate reported to ACPI for purposes of calculating battery time remaining.
5. Fixed issue in which the user may need to suspend touchpad and trackstick use for several seconds before either device will respond.
6. Fixed issue in which some external serial port devices attached to the system may detect a break or framing error when the operating system loads.
7. Fixed issue in which certain CD-ROM, DVD and CD-RW drives installed in the system modular bay may increase the amount of time required to wake from Standby under Windows 2000 and Windows XP.
8. Fixed issue in which the system may reboot when certain DVD drives are inserted into the system modular bay after resuming from Standby.
9. Fixed issue in which the system may hang after adding, removing or changing the password for a second hard disk drive installed in the C/Dock media bay under an APM operating system.
10. Fixed issue in which USB devices may be disabled if multiple devices on the same bus are reset at the same time.
11. Fixed issue where a Secondary display may not display after a resume from disk under APM operating systems.
12. Fixed issue seen under APM operating systems in which the system may hang after resuming from a re-suspend due to entering an incorrect BIOS or hard disk drive password.
13. Fixed system hang seen when the user suspends the system using the Sleep Button () then closes the lid and resumes after warm docking to a docking station with a CRT attached.
14. Fixed problem where PXE booting may not connect to a RIS server.
15. Fixed intermittent issue in which the system may fail to complete POST with AC power attached and a fully discharged battery installed.
16. Fixed issue seen under Windows NT 4.0 in which a BIOS or hard disk drive password screen would not be visible during resume from suspend.
17. Fixed issue in which certain USB CF and SmartMedia card readers are not detected after a cold reboot.
Enhancements:
1. Replaced with as the hotkey used to exit the One Time Boot Menu screen.
2. The ATI M3 video BIOS has been upgraded to version 4.100.
Læs mereIssues Fixed:
1. Fixed issue in which ISA devices could not be manually reconfigured to use IRQ 10 in Device Manager.
2. Fixed issue in which some bootable CDs do not boot.
3. Fixed issue in which the system may hang or unexpectedly reboot with Boot Speed set to Compatible and USB Legacy enabled.
4. Improved accuracy of the battery discharge rate reported to ACPI for purposes of calculating battery time remaining.
5. Fixed issue in which the user may need to suspend touchpad and trackstick use for several seconds before either device will respond.
6. Fixed issue in which some external serial port devices attached to the system may detect a break or framing error when the operating system loads.
7. Fixed issue in which certain CD-ROM, DVD and CD-RW drives installed in the system modular bay may increase the amount of time required to wake from Standby under Windows 2000 and Windows XP.
8. Fixed issue in which the system may reboot when certain DVD drives are inserted into the system modular bay after resuming from Standby.
9. Fixed issue in which the system may hang after adding, removing or changing the password for a second hard disk drive installed in the C/Dock media bay under an APM operating system.
10. Fixed issue in which USB devices may be disabled if multiple devices on the same bus are reset at the same time.
11. Fixed issue where a Secondary display may not display after a resume from disk under APM operating systems.
12. Fixed issue seen under APM operating systems in which the system may hang after resuming from a re-suspend due to entering an incorrect BIOS or hard disk drive password.
13. Fixed system hang seen when the user suspends the system using the Sleep Button (
14. Fixed problem where PXE booting may not connect to a RIS server.
15. Fixed intermittent issue in which the system may fail to complete POST with AC power attached and a fully discharged battery installed.
16. Fixed issue seen under Windows NT 4.0 in which a BIOS or hard disk drive password screen would not be visible during resume from suspend.
17. Fixed issue in which certain USB CF and SmartMedia card readers are not detected after a cold reboot.
Enhancements:
1. Replaced
2. The ATI M3 video BIOS has been upgraded to version 4.100.
Version
A22, A22
Udgivelsesdato
13 nov. 2002
Downloadtype
System-BIOS
Kategori
BIOS
Vigtighed
ValgfritDell Technologies anbefaler at gennemse denne opdatering for at afgøre, om den er relevant for dit system. Opdateringen indeholder ændringer, der kun har indflydelse på visse konfigurationer, eller tilvejebringer nye funktioner, der muligvis passer til dit miljø.
Tilgængelige formater
Filformat: ZipPack-ekstern
Filnavn: A22-C600.exe
Filstørrelse: 2.14 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Denne fil indeholder komprimerede (eller ZIP) filer. Hent filen til en mappe på din harddisk, og kør den derefter (dobbeltklik) for at udpakke filerne. Følg instruktionerne for at fuldføre installationen.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
Filformat: En eller flere selvudpakkende diskimages i en selvudpakkende zipfil
Filnavn: C600-A22.exe
Filstørrelse: 502.5 KB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Denne fil indeholder komprimerede (eller ZIP) filer. Hent filen til en mappe på din harddisk, og dobbeltklik derefter på den for at udpakke filerne. Følg instruktionerne for at fuldføre installationen.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
Filformat: Flash BIOS-eksekverbar fil
Filnavn: C600_A22.exe
Filstørrelse: 322.64 KB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dette filformat består af en BIOS-eksekverbar fil. Hvis du vil opdatere dit system, skal du downloade filen, gemme den på skrivebordet eller harddisken og køre den eksekverbare fil. Hvis du vil opdatere BIOS, skal systemet være tilsluttet AC-adapteren, og batteriet skal som minimum være 10 % opladet.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
Filformat: En tekstfil, der indeholder læsevenlige oplysninger om rettelser og forbedringer
Filnavn: C600_A22.TXT
Filstørrelse: 32.11 KB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dette filformat indeholder almindelig tekst, som kan vises med en standardteksteditor.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
Når du downloader filerne, accepterer du samtidig betingelserne i Dells softwarelicensaftale. (på engelsk)
Installationsvejledning
Default Instructions for C600_A22.exe:
Important Information:
The Non-packaged format is intended for advanced users
that only require the executable and do not require a bootable self-
extracting disk be created for them. All other users should download the
Floppy format, which creates a bootable self-extracting disk.
Instructions:
This file format consists of a BIOS executable file. To use it, download
the file and copy it to a DOS-bootable diskette. With the diskette in the
floppy drive, reboot the system and run the program.
Default Instructions for C600_A22.TXT:
This is a DOS text file containing the fixes and features included in this
BIOS release.
Floppy Disk Boot to Disk for C600-A22.exe
Download
1. Click Download Now, to download the file.
2. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In:
window appears.
3. From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file
icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 1 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click Setup. An black MS-DOS window appears with a message
indicating that you need 1 floppy diskettes.
4. Press the [ENTER] key.
A message appears prompting you to insert a blank floppy diskette.
5. Insert a floppy disk into the floppy disk drive.
6. Press the [ENTER] key. A message appears indicating that all
data on the disk will be erased.
7. Press the [y] key and then press the [ENTER] key.
The files are copied to the floppy diskette. If the procedure requires
more than one diskette, repeat steps 5 – 7 until you reach the end of the diskette set.
8. After all the files have been copied to the last floppy disk,
press the [ENTER] key and the MS-DOS window closes.
Install
1. Insert the first (or the only) disk of the set into the Floppy
drive.
2. Click Start, click Shutdown, click Restart, and then click OK.
Windows XP Users need only click restart.
3. Follow the on-screen instructions.
Default Instructions for A22-C600.exe:
Floppyless Installation (via WinZip) for A22-C600.exe
Download
1. Click the location, e.g. Americas, from which you want to download
the file.
2. If the Export Compliance Disclaimer window appears, click Yes, I
Accept this Agreement.
3. When the File Download window appears, click Save this program to
disk and click OK. The Save In window appears.
4. From the Save In drop-down menu, click to select Desktop and then
click Save. The file will download to your desktop.
5. If a Download Complete window appears, click Close. A new icon
appears on your desktop.
Install
1. Double-click the new icon on the desktop labeled A22-C600.exe.
2. The Self-Extracting window appears and prompts you to extract or
unzip to c:\dell\drivers\r52071. If you did not print these instructions,
write down this path.
3. Click Continue.
4. Click OK.
5. A window appears indicating all files were successfully unzipped.
Click OK.
6. The Setup program will start automatically. Select your language
and click OK.
7. Follow the on-screen installation instructions.
Default Instructions for C600_A22.exe:
Important Information:
The Non-packaged format is intended for advanced users
that only require the executable and do not require a bootable self-
extracting disk be created for them. All other users should download the
Floppy format, which creates a bootable self-extracting disk.
Instructions:
This file format consists of a BIOS executable file. To use it, download
the file and copy it to a DOS-bootable diskette. With the diskette in the
floppy drive, reboot the system and run the program.
Default Instructions for C600_A22.TXT:
This is a DOS text file containing the fixes and features included in this
BIOS release.
Floppy Disk Boot to Disk for C600-A22.exe
Download
1. Click Download Now, to download the file.
2. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In:
window appears.
3. From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file
icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 1 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click Setup. An black MS-DOS window appears with a message
indicating that you need 1 floppy diskettes.
4. Press the [ENTER] key.
A message appears prompting you to insert a blank floppy diskette.
5. Insert a floppy disk into the floppy disk drive.
6. Press the [ENTER] key. A message appears indicating that all
data on the disk will be erased.
7. Press the [y] key and then press the [ENTER] key.
The files are copied to the floppy diskette. If the procedure requires
more than one diskette, repeat steps 5 – 7 until you reach the end of the diskette set.
8. After all the files have been copied to the last floppy disk,
press the [ENTER] key and the MS-DOS window closes.
Install
1. Insert the first (or the only) disk of the set into the Floppy
drive.
2. Click Start, click Shutdown, click Restart, and then click OK.
Windows XP Users need only click restart.
3. Follow the on-screen instructions.
Default Instructions for A22-C600.exe:
Floppyless Installation (via WinZip) for A22-C600.exe
Download
1. Click the location, e.g. Americas, from which you want to download
the file.
2. If the Export Compliance Disclaimer window appears, click Yes, I
Accept this Agreement.
3. When the File Download window appears, click Save this program to
disk and click OK. The Save In window appears.
4. From the Save In drop-down menu, click to select Desktop and then
click Save. The file will download to your desktop.
5. If a Download Complete window appears, click Close. A new icon
appears on your desktop.
Install
1. Double-click the new icon on the desktop labeled A22-C600.exe.
2. The Self-Extracting window appears and prompts you to extract or
unzip to c:\dell\drivers\r52071. If you did not print these instructions,
write down this path.
3. Click Continue.
4. Click OK.
5. A window appears indicating all files were successfully unzipped.
Click OK.
6. The Setup program will start automatically. Select your language
and click OK.
7. Follow the on-screen installation instructions.
Har du brug for hjælp med BIOS-problemer?
Find en løsning i Dells fejlfindingsvejledning for BIOSHjælp og selvstudier til drivere
Du kan finde flere downloads på Drivere og overførsler. Hvis du har brug for hjælp til at bruge oplysningerne på denne side, kan du besøge Hjælp og selvstudier til drivere.