Dell Networking N2000 Series, Firmware Version 6.1.1.7, A03
Neustart erforderlichInstalliertDiese Datei wurde automatisch im Rahmen einer vor Kurzem erfolgten Aktualisierung installiert. Wenn Probleme auftreten, können Sie die Datei manuell herunterladen und erneut installieren.
Der Inhalt dieser Seite wurde möglicherweise automatisch übersetzt. Füllen Sie das Formular unten auf der Seite aus, um Feedback zu geben.
Diese Datei wurde automatisch im Rahmen einer vor Kurzem erfolgten Aktualisierung installiert. Wenn Probleme auftreten, können Sie die Datei manuell herunterladen und erneut installieren.
Both Dell Networking N2000 and N3000 Series switches share the same firmware image file (N3000_N2000v6.1.1.7.stk). If your N2000 series switch has an earlier version of firmware (6.0.0.7 or 6.0.0.8 or 6.0.1.3), upgrade your switch to the latest version of firmware 6.1.1.7 as it contains multiple bug fixes.
After upgrading the switch firmware version to 6.1.1.7, the boot code update is required on N2000 and N3000 series switches via serial console if switch is running with the older boot code version. The latest boot code version available for N2000 and N3000 series switches is “U-Boot SPL 2012.10-00078-g24e99ea (Jun 24 2014 - 16:41:18)"
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.1.1.7_Release_Notes".
Please follow firmware upgrade instructions included in the zip file - "Upgrading Dell Networking N2000_N3000 Series Switches From Version 6.x.x.x to 6.1.1.7 Firmware"
Empfohlen
Kompatibilität prüfen
Bitte geben Sie Ihre Produktdetails ein, um die neuesten Treiberinformationen für Ihr System anzuzeigen.
Dell Service-Tag-Nummer oder Modell eingeben
Sie möchten Ihr Produkt suchen? Geben Sie eine Produktkennung ein.Anleitung
Keine Ergebnisse gefunden. Wir konnten für Ihre Suchanfrage keine Ergebnisse finden. Ändern Sie Ihre Suche, um eine Service-Tag-Nummer (B959FS3) oder ein Modell (Latitude 5540) einzugeben, und versuchen Sie es erneut.
Dieser Treiber ist nicht kompatibel.
Dieser Treiber ist für das ausgewählte Produkt nicht verfügbar. Wählen Sie ein anderes Produkt aus, um Ihre Produktdetails für diesen Treiber erneut einzugeben, oder besuchen Sie die Seite Produktsupport, um alle Treiber für ein anderes Produkt anzuzeigen.
Melden Sie sich bei Windows als AdministratorIn an, um den automatischen Scan zu nutzen. Wenn Sie bereits als AdministratorIn angemeldet sind und diese Meldung angezeigt wird, führen Sie einen Neustart durch.Ihr System wird von Ihrem IT-Administrator verwaltet und die Funktionen sind möglicherweise eingeschränkt.
Weitere Updates finden. Nutzen Sie SupportAssist, um alle aktuellen Treiberupdates für Ihr Gerät zu finden.
Fehlerkorrekturen und Verbesserungen
Fixes: 753276 When applying ACL to vlan interface PBR stops working 762345 N40xx v6.0.1.3 Random FAN and PMBUS errors 769220 igmp snooping/flooding implementation change 772696 Power negotiation fails with Cisco 9971 IP Phone 789841 QinQ does not work after reload of individual UNIT or Stack Reload or Stack UNIT reload 764268 emweb_main crashdump analysis required 780759 PC81XX N series , no way to enable IGMP globally from CLI, can only enable IGMP globally from GUI. 794305 N40xx v6.0.1.3 confirmation of traffic-shape minimum bandwidth 796923 6.0.1.3 - show ip igmp membership command shows incorrect messaging about "ip igmp" command 798430 Many customer complaints on N2000 fan noise 796256 N2048P --- Issues powering up POE devices on certain switch port interfaces. 792879 N2048P --- Issues powering up POE devices on certain switch port interfaces. 749031 Switch crashes intermittently with tArpCallback & IpHelperTask task related errors 804613 fw 6.1.0.1 - VLAN1 down after assigning static IP address 819033 Helix4 Field Alert: GS_REFCLK Input termination is not enabled (kernel patch) 819034 Helix4 Field Alert: GS_REFCLK Input termination is not enabled (u-boot patch) 810135 N3000/N2000 --- Stack's management IP can't be pinged after stack failover happened. 809376 6.1.0.1 - SNMP MIB for Power Supply and Fan Tray info of all units in the stack 819042 DVLAN: Port Channel member links are flapping up and down 815537 fix for OpenSSL SSLTLS MITM vulnerability CVE-2014-0224 819041 DUT crashes when the pbr with mac acl is applied on the vlan routing interface 819040 PBR : ACL associated to a VLAN interface's displays the message on the console "Access groups are not supported when configured on the same interface as a PBR route map" 816937 Hapi dvlan notification handler is trying to configure customer ports in legacy mode(this configuration is not supported) 819035 During initiate failover, Multicast traffic loss is seen for longer time and also few log messages are observed on console 812302 [N4000/N4064]Dell SFP GF76J is showing as N/A when we run show interface transceiver. 819043 Clone: PBR: IP Precedence is not working when we delete and re-configure route-map 819052 Traffic is forwording to a routing inteface even though PBR rule is not applied on that interface 816218 6.1.0.1 Continuous LACP flap on Force 10 device when used with N-series MLAG implementation 820595 Seeing console hang on enabling "ip routing" with PBR rule and ACL rule applied on same Vlan interface. 280478 observed dtl crash 812329 N2000 stack showing memory errors on members 8-11 when on version 6.1.0.1, 828011 When default route is present in camero the default nexthop option of PBR is failed 826341 6.1.0.6 - N-Series - Configured 10G ports return to default configuration after power on reboot.
Enhancements: None
Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.1.1.7_Release_Notes"
Dell Technologies empfiehlt, dieses Update während Ihres nächsten planmäßigen Updatezyklus durchzuführen. Das Update enthält Änderungen zur Aufrechterhaltung des Gesamtsystemzustands. Es stellt sicher, dass die Systemsoftware aktuell und kompatibel mit anderen Systemmodulen (Firmware, BIOS, Treiber und Software) bleibt und möglicherweise andere neue Funktionen enthält.
Dateiformat:Extrahiert Dateien direkt auf die lokale Festplatte
Dateiname:N2000v6.1.1.7a03.zip
Dateigröße:19.45 MB
Dies ist eine große Datei. Abhängig von Ihrer Verbindungsgeschwindigkeit kann das Herunterladen einige Zeit in Anspruch nehmen.
Beschreibung des Dateiformats:
Dieses Dateiformat umfasst ein Dateiarchiv, das in einem Verzeichnis auf der Festplatte dekomprimiert werden kann. Die Installation kann anschließend von diesem Verzeichnis aus durchgeführt werden.
Fixes: 753276 When applying ACL to vlan interface PBR stops working 762345 N40xx v6.0.1.3 Random FAN and PMBUS errors 769220 igmp snooping/flooding implementation change 772696 Power negotiation fails with Cisco 9971 IP Phone 789841 QinQ does not work after reload of individual UNIT or Stack Reload or Stack UNIT reload 764268 emweb_main crashdump analysis required 780759 PC81XX N series , no way to enable IGMP globally from CLI, can only enable IGMP globally from GUI. 794305 N40xx v6.0.1.3 confirmation of traffic-shape minimum bandwidth 796923 6.0.1.3 - show ip igmp membership command shows incorrect messaging about "ip igmp" command 798430 Many customer complaints on N2000 fan noise 796256 N2048P --- Issues powering up POE devices on certain switch port interfaces. 792879 N2048P --- Issues powering up POE devices on certain switch port interfaces. 749031 Switch crashes intermittently with tArpCallback & IpHelperTask task related errors 804613 fw 6.1.0.1 - VLAN1 down after assigning static IP address 819033 Helix4 Field Alert: GS_REFCLK Input termination is not enabled (kernel patch) 819034 Helix4 Field Alert: GS_REFCLK Input termination is not enabled (u-boot patch) 810135 N3000/N2000 --- Stack's management IP can't be pinged after stack failover happened. 809376 6.1.0.1 - SNMP MIB for Power Supply and Fan Tray info of all units in the stack 819042 DVLAN: Port Channel member links are flapping up and down 815537 fix for OpenSSL SSLTLS MITM vulnerability CVE-2014-0224 819041 DUT crashes when the pbr with mac acl is applied on the vlan routing interface 819040 PBR : ACL associated to a VLAN interface's displays the message on the console "Access groups are not supported when configured on the same interface as a PBR route map" 816937 Hapi dvlan notification handler is trying to configure customer ports in legacy mode(this configuration is not supported) 819035 During initiate failover, Multicast traffic loss is seen for longer time and also few log messages are observed on console 812302 [N4000/N4064]Dell SFP GF76J is showing as N/A when we run show interface transceiver. 819043 Clone: PBR: IP Precedence is not working when we delete and re-configure route-map 819052 Traffic is forwording to a routing inteface even though PBR rule is not applied on that interface 816218 6.1.0.1 Continuous LACP flap on Force 10 device when used with N-series MLAG implementation 820595 Seeing console hang on enabling "ip routing" with PBR rule and ACL rule applied on same Vlan interface. 280478 Observed dtl crash 812329 N2000 stack showing memory errors on members 8-11 when on version 6.1.0.1, 828011 When default route is present in camero the default nexthop option of PBR is failed 826341 6.1.0.6 - N-Series - Configured 10G ports return to default configuration after power on reboot.
Enhancements: None
Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.1.1.7_Release_Notes"
(1) Download the zip file - N2000v6.1.1.7a03.zip (2) Extract the image file "N3000_N2000v6.1.1.7.stk" from the zip file (3) Install the image to the switch by following the upgrade procedure "Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.1.1.7 Firmware.pdf" extracted from zip file.
Benötigen Sie Hilfe bei Netzwerkverbindungsproblemen?
Eine Lösung finden Sie im Leitfaden zur Fehlerbehebung für Netzwerke von Dell.