Dateien herunterladen
Dateiformat: Dieses Format umfasst ein Archiv aus PDF-Dateien mit Verfahrensinformationen und hilfreichen Tipps für Dell Kunden. Um die Dateien im Archiv anzeigen zu können, muss zunächst Adobe Acrobat Reader installiert werden.
Dateiname: DellFluidFS-2.0.7680-SP.pdf
Dateigröße: 61.35 KB
Um die Integrität Ihres Downloads zu sichern, prüfen Sie bitte den Prüfsummenwert.
MD5: 9062c3fab7c2a57fdd9336338bcdcade
SHA1: 581610d48bd8ba1c520d2e8e6119e04cb883e91f
SHA-256: 042b87449cc8b04713c8a083de2352fdd5b812f24997b5ac5ccb620ae8698375
Fehlerkorrekturen und Verbesserungen
This is the service pack for Dell NX36x0 to upgrade Fluid FS to version 2.0.7680.
This service pack contains important fixes to the previous versions of FluidFS V2.0 and earlier code. Details of the fixes and enhancements can be obtained by following the instructions in the DellFluidFS-2.0.7680-SP.PDF file.
Wichtige Informationen
Please follow the instructions provided in the attached PDF file. Upon receiving the service pack file from the FluidFS upgrade team, do not rename the file after extracting from the zip file. The service pack file name must be DellFS-2.0.7680-SP.sh when it is uploaded to the system or the installation may fail.
Unterstützte Betriebssysteme
Installationsanweisungen
Note: Follow the instructions in the PDF to perform a health check of your NAS and ensure that the system is in optimal, full service condition. Also ensure that all environmental items (for example DNS, Active Directory, LDAP/NIS are reachable via network from the NAS system) are functioning before the upgrade.
1. Determine the current version of FluidFS in NX3500 by performing one of the following:
a. Open WebUI to the NX3500 appliance, go to System Management - General - System Information. System version will be displayed here.
b. Open SSH connection to the NX3500 appliance and at the CLI prompt run the command
system general info system-version view
System version = 1.0.4xx
or
System version = 2.0.xxxx
Note: If the version displayed in the CLI or GUI is less than the service pack version 2.0.7630, apply the service pack. To access the NX3500 CLI from a workstation, use an SSH client, and connect to the NAS Management VIP address using the admin account.
2. Request the service pack from FluidFS upgrade team
3. Extract the Service Pack from the zip file.
IMPORTANT Do not rename the service pack file after you extract it from the zip
4. Follow the instructions in the Installing the Service Pack section of the Dell NX3500 Administrator's guide to upgrade your Dell NX3500 system with the service pack .
NX3500 http://support.dell.com/support/edocs/stor-sys/NX3500/
5. To verify your system has been updated to FluidFS version 2.0.7680 repeat step 1.