Dateien herunterladen
Dateiformat: Diese Datei umfasst einen Satz komprimierter oder gezippter Dateien. Laden Sie die ZIP-Datei in einen Ordner auf der Festplatte herunter und entpacken Sie sie mit einem Doppelklick. Befolgen Sie die Anweisungen, um die Installation abzuschließen.
Dateiname: EZ501300.EXE
Dateigröße: 1.15 MB
Dateiformat: Diese Datei umfasst einen Satz komprimierter oder gezippter Dateien. Laden Sie die ZIP-Datei in einen Ordner auf der Festplatte herunter und entpacken Sie sie mit einem Doppelklick. Befolgen Sie die Anweisungen, um die Installation abzuschließen.
Dateiname: ED501301.exe
Dateigröße: 1.49 MB
Fehlerkorrekturen und Verbesserungen
Delldiag has been enhanced to support new platforms. Older releases
included EDDXXXX.EXE which is now obsolete.
Unterstützte Betriebssysteme
Installationsanweisungen
Custom Instructions for ED501301.exe:
NOTE: In order to create this diskette set, this file must be downloaded
to and executed on a system running Microsoft Windows.
Download
1. Click the location, e.g. Americas, from which you want to download the file.
2. If the Export Compliance Disclaimer window appears, click Yes, I
Accept this Agreement.
3. When the File Download window appears, click Save this program to
disk and click OK. The Save In window appears.
4. From the Save In drop-down menu, click to select Desktop and then
click Save. The file will download to your desktop.
5. If a Download Complete window appears, click Close. A new icon
appears on your desktop.
Diskette Creation
1. Double-click the new icon on the desktop. The Self-Extractor window
appears.
2. Click Setup. An MS-DOS window appears with a message indicating
how many diskettes you will need.
3. Press the [ENTER] key. A message appears prompting you to insert
a blank diskette. Insert a diskette into the drive.
4. Press the [ENTER] key. A message appears indicating that all data
on the disk will be erased.
5. Press the [y] key and then press the [ENTER] key. The files are
copied to the diskette. Once the files have been copied to the diskette a message appears prompting you to insert the next diskette.
6. Repeat steps 3 - 5 until you reach the end of the diskette set. Label
each diskette with a disk number starting from 1.
7. After all the files have been copied to the last diskette, press the
[ENTER] key and the MS-DOS window closes.
Running the Diagnostics
1. Insert the first diskette of the set into your floppy disk drive.
2. Click Start, click Shutdown, click Restart, and then click OK to
reboot your system.
3. Follow the on-screen instructions.
Custom Instructions for EZ501300.EXE:
NOTE: This file must be downloaded to and executed on a system
running Microsoft Windows.
Download
1. Click the location, e.g. Americas, from which you want to download
the file.
2. If the Export Compliance Disclaimer window appears, click Yes, I
Accept this Agreement.
3. When the File Download window appears, click Save this program to
disk and click OK. The Save In window appears.
4. From the Save In drop-down menu click to select Desktop and then
click Save. The file will download to your desktop.
5. If a Download Complete window appears, click Close. A new icon
appears on your desktop.
Hard Drive Installation
1. Double-click the new icon on the desktop labeled EZ501300.exe.
2. When the Self-Extractor window appears, click Continue.
3. A dialog box will prompt you for the directory to unzip the files to.
Normally you should leave the default path. This path must be on an
MS-DOS FAT partition. If you extract the files to any other type of
partition (for example NTFS) you will not be able to run the diagnostics.
Write down the path where the files were placed.
4. Click OK.
5. If you get a prompt asking you if you would like to create the
directory, click YES.
6. After a few seconds a dialog box will appear that says that all files
were successfully unzipped. Click OK to exit from the installer.
Running the Diagnostics from a Hard Drive
1. In order to run the diagnostics you must boot to an MS-DOS prompt.
If necessary create a DOS boot disk. For more information, refer to Dell Knowledge Base Article TT1014475 - "What can I use for a boot disk with CD-ROM support?"
2. Insert the floppy disk into the floppy drive and reboot the computer.
3. At the A:/> prompt, type "C:" (or the drive letter where you saved
the diagnostics to) and then press the [ENTER] key.
4. Type "cd c:\dell\drivers\R51358" (or the path that you specified
above) and then press [ENTER].
5. Type "MpMemory /a /w" and then press [ENTER] to run memory
diagnostics or type "Delldiag" and then press [ENTER] to run all other diagnostics.
6. Fo
Gilt für
32 bit Diagnostics
INFO,DIAGS,ENTERPRISE