Linux SLES10 SP4 Driver 00.00.05.39-1 for PERC H310 / H710 / H710P / H810 Controllers.

The driver package is a compressed tar file.

To extract the components within the tar file, un-tar the files: # tar -xvzf

Extracted files should contain the following:
- dkms rpm (dkms-.rpm)
- driver rpm (megaraid_sas-.rpm)
- source code (megaraid_sas--src.tgz)

Updating the Driver:

The SLES10SP4 native (in-box) driver is for OS installation only. The driver must be upgraded once the OS installation is done.

1. Install the DKMS rpm package if needed. Use this command
# rpm -ivh

NOTE: Use rpm -Uvh when updating an existing package.

2. Install the Driver package. Use this command
# rpm -ivh

3. Verify the driver has been loaded with this system command:
# modinfo megaraid_sas

and this dkms command:
# dkms status

The version shown in the output should match in both cases and with the version of the package.

Reboot will be required