Dell Networking 8100, Firmware Version 6.2.6.6,A08
Neustart erforderlichInstalliertDiese Datei wurde automatisch im Rahmen einer vor Kurzem erfolgten Aktualisierung installiert. Wenn Probleme auftreten, können Sie die Datei manuell herunterladen und erneut installieren.
Der Inhalt dieser Seite wurde möglicherweise automatisch übersetzt. Füllen Sie das Formular unten auf der Seite aus, um Feedback zu geben.
Diese Datei wurde automatisch im Rahmen einer vor Kurzem erfolgten Aktualisierung installiert. Wenn Probleme auftreten, können Sie die Datei manuell herunterladen und erneut installieren.
After upgrading Dell Networking PC8100 Series switches to firmware version 6.0.0.8 or later (6.2.6.6); the system model ID will show as "N4000" in CLI, Web UI and SNMP interfaces. Dell PowerConnect 8100 Series switches supports N4000 firmware versions 6.0.0.8 and later (6.2.6.6). Both Dell PowerConnect 8100 Series and Dell Networking N4000 Series switches shares the same firmware image version (for example., N4000v6.2.6.6.stk). Dell Networking PC8100 series switches can be stacked with Dell Networking N4000 series switches with the entire stack required to run 6.0.0.8 or later firmware (6.2.6.6). Dell Networking PC8100 series switches can support both 5.x and 6.x firmware versions, but Dell Networking N4000 can support only 6.0.0.8 and later firmware versions.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.2.6.6_Release_Notes".
Please follow software update instructions included in the zip file - "Upgrading Dell Networking PC8100 Series Switches From Version 5.x.x.x or 6.x.x.x to 6.2.6.6 Firmware.pdf".
Note: PowerConnect 8100 Series switches with B1 CPU Revision require firmware version 5.1.0.1 or later (6.2.6.6) and cannot be downgraded to earlier releases. If this unit is to be deployed as a member within a stack, the entire stack will be required to run 5.1.0.1 or later firmware (6.2.6.6). The improved CPU version XLP308H-B1 version is not compatible with firmware 5.0.x.x. The 'show version' CLI command in the 5.1.0.1 release has been improved to identify the CPU version of the switch.
Empfohlen
Kompatibilität prüfen
Bitte geben Sie Ihre Produktdetails ein, um die neuesten Treiberinformationen für Ihr System anzuzeigen.
Dell Service-Tag-Nummer oder Modell eingeben
Sie möchten Ihr Produkt suchen? Geben Sie eine Produktkennung ein.Anleitung
Keine Ergebnisse gefunden. Wir konnten für Ihre Suchanfrage keine Ergebnisse finden. Ändern Sie Ihre Suche, um eine Service-Tag-Nummer (B959FS3) oder ein Modell (Latitude 5540) einzugeben, und versuchen Sie es erneut.
Dieser Treiber ist nicht kompatibel.
Dieser Treiber ist für das ausgewählte Produkt nicht verfügbar. Wählen Sie ein anderes Produkt aus, um Ihre Produktdetails für diesen Treiber erneut einzugeben, oder besuchen Sie die Seite Produktsupport, um alle Treiber für ein anderes Produkt anzuzeigen.
Melden Sie sich bei Windows als AdministratorIn an, um den automatischen Scan zu nutzen. Wenn Sie bereits als AdministratorIn angemeldet sind und diese Meldung angezeigt wird, führen Sie einen Neustart durch.Ihr System wird von Ihrem IT-Administrator verwaltet und die Funktionen sind möglicherweise eingeschränkt.
Weitere Updates finden. Nutzen Sie SupportAssist, um alle aktuellen Treiberupdates für Ihr Gerät zu finden.
Fehlerkorrekturen und Verbesserungen
New Features & Enhancements: Added lower-case dot1x MAB user-name/password support to radius-server Added ssh public key authentication support Added TLSv1.0 as HTTPS protocol by default and disabled SSLv2 and SSLv3 by default Kernel updates and SSL version upgrade to 1.0.1.o PoE Controller firmware updated to 265_1
Fixes: 954419 - N4000 - 6.2.6.5 - Stack member crash "hapiMcAsyncTask" 954364 - N4000 - 6.2.6.5 - Stack member crash "hapiRxTask" 948955 - N-Series - 6.2.6.3 - Incorrect Dynamic MAC Address-table entry for Data-VLAN 939744 - N-Series-6.2.1.6-ip ospf and rip authentication encrypt string is showing in clear-text 939170 - N-Series - 6.2.1.6 - RSTP BPDU packet dropped if hello timer mismatch 936925 - N-Series-6.2.1.6 -Layer3 interface (vlans) stays down when stack master is powered off abruptly 936580 - N4000 - 6.2.1.6 -Switch stack unresponsive with mcastMapTask crash logs 936193 - N-Series - Observed "LLDP entry delete failed" log messages 934566 - N-Series-6.2.1.6-show buffers command shows incorrectly spaced or garbled output via telnet/SSH 934053 - N-Series - 6.2.1.6 - BGP AS Number Range (Unassigned by IANA) 927589 - N3000-6.2- IPv6 neighbor solicitation multicast not distributed to non-management stack members 927035 - N2048P - 6.2.0.5 - PoE interoperability issue with D-Link PoE Splitter 926627 - N-Series - 6.2.1.6 - Multiple vulnerabilities (CVE-2011-3389, CVE-2013-2566 and CVE-2015-2808) 926109 - N-Series - 6.2.1.6 - Port-security violation is not logged for ports with Sticky MAC enabled 923480 - N-Series - 6.2.1.5 - Port-Security (Sticky MAC) with voice VLAN is not working as expected 923462 - N-Series - 6.2.1.5 - Ports stop learning dynamic MAC address after disabling sticky MAC 921359 - N-Series - 6.2 - dot1x unauth-vlan not working with authentication order enabled 920185 - N3000 - 6.2 - Front 10G ports goes down when 10G SFP extension module is removed from the slot 914354 - N4000 - 6.2.0.5 - IPv6 Multicast not filtered by MLAG Peer-Link 913185 - N2000 - Switchport is not removed from unauth VLAN even after passing dot1x authentication. 913140 - N3000 - MLAG/LACP issue "Error allocating buffer pools for the received dot3ad data message" 907751 - N4000-6.2.0.5 - emWeb crash when Nessus Scan perform SSH login with Radius auth 890635 - N2000-6.1.2.4 - SNMP MIB Walk OID "1.3.6.1.4.1.674.10895.3000.1.2.100" returns URL http://0.0.0.0 859610 - N3000 - ssh public key authentication doesn't work 813685 - N3000 -IPV6 USGv6 Interoperability and Basic Conformance failures 939526 - N40xx - Stacked and running RPVST is often unable to learn GARP address after failover. 918049 - N20xx - 6.2.1.2 - SSH Radius authentication fails on first attempt 907697 - N20xx -6.1.2.4-dot1x mac based authentication,clients behind phones can't forward traffic 937583 - N40xxF - 6.2.0.5: Very slow response to 'show' CLIs when SFP/QSFPs are present 934044 - N2048 - 6.2.1.6: Switch crashes or hangs after multiple SSH session retries on switch 926091 - N40xxF - 6.2.0.5: Customer has stack and when issuing 'show' CLI causing his ping to timeout 924613 - N2048P - 6.2.0.5: CDC RX FIFO entry 45 ECC error seen 922438 - N-Series - 6.2.0.5/6.2.1.4: 'show port-security dynamic ' show learned even with no sec 921371 - N2048P - 6.1.2.4/6.2.0.5: Aastra 6725IP phone not getting power when connected to switch 920799 - N-Series - 6.1/6.2 - Ports flapping when port-channel membership is being modified via WebUI 891874 - N2048 - 6.1.2.4: Switch not sending snmp trap notification for UP/DOWN status on loopback interfaces 881612 - N2048 - 6.1.2.4: web timeout (HTTPS) does not depend on exce-timeout configuration 944153 - N4064F 6.2.1.6 : switch stack takes a very long time to respond for any sh commands 943187 - N4064F :6.2.1.6: stack of 2, stop processing incoming CPU packets when show tech-support 944106 - N3048 - 6.2.1.6 Banner is not displayed in running configuration after a reboot
Dell Technologies empfiehlt, dieses Update während Ihres nächsten planmäßigen Updatezyklus durchzuführen. Das Update enthält Änderungen zur Aufrechterhaltung des Gesamtsystemzustands. Es stellt sicher, dass die Systemsoftware aktuell und kompatibel mit anderen Systemmodulen (Firmware, BIOS, Treiber und Software) bleibt und möglicherweise andere neue Funktionen enthält.
Dateiformat:Extrahiert Dateien direkt auf die lokale Festplatte
Dateiname:PC8100v6.2.6.6a08.zip
Dateigröße:24.37 MB
Dies ist eine große Datei. Abhängig von Ihrer Verbindungsgeschwindigkeit kann das Herunterladen einige Zeit in Anspruch nehmen.
Beschreibung des Dateiformats:
Dieses Dateiformat umfasst ein Dateiarchiv, das in einem Verzeichnis auf der Festplatte dekomprimiert werden kann. Die Installation kann anschließend von diesem Verzeichnis aus durchgeführt werden.
Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.2.6.6_Release_Notes"
(1) Download the zip file - PC8100v6.2.6.6a08.zip (2) Extract the image file "N4000v6.2.2.6.stk" from the zip file (3) Install the image to the switch by following the upgrade procedure "Upgrading Dell Networking PC8100 Series Switches From Version 5.x.x.x or 6.x.x.x to 6.2.6.6 Firmware.pdf" extracted from zip file.
Benötigen Sie Hilfe bei Netzwerkverbindungsproblemen?
Eine Lösung finden Sie im Leitfaden zur Fehlerbehebung für Netzwerke von Dell.