Dell 32-Bit Diagnoseprogramm, A5019

Custom Instructions for ED501912.exe:

NOTE: In order to create this diskette set, this file must be downloaded
to and executed on a system running Microsoft Windows.

Download

1. Click the location, e.g. Americas, from which you want to download
the file.
2. If the Export Compliance Disclaimer window appears, click Yes, I
Accept this Agreement.
3. When the File Download window appears, click Save this program to
disk and click OK. The Save In window appears.
4. From the Save In drop-down menu, click to select Desktop and then
click Save. The file will download to your desktop.
5. If a Download Complete window appears, click Close. A new icon
appears on your desktop.

Diskette Creation

1. Double-click the new icon on the desktop. The Self-Extractor window
appears showing how many blank floppy disks will be needed.
2. Insert a blank diskette then click "Continue ..".
3. When prompted, repeat step 2 until you reach the end of the
diskette set. Label each diskette with a disk number starting from 1.
4. After all the files have been copied to the last diskette,
click "Finish".

Running the Diagnostics

1. Insert the first diskette of the set into your floppy disk drive.
2. Boot to the diskette.
3. Follow the on-screen instructions.
Custom Instructions for EZ501902.EXE:

NOTE: This file must be downloaded to and executed on a system
running Microsoft Windows.

Download

1. Click the location, e.g. Americas, from which you want to download
the file.
2. If the Export Compliance Disclaimer window appears, click Yes, I
Accept this Agreement.
3. When the File Download window appears, click Save this program to
disk and click OK. The Save In window appears.
4. From the Save In drop-down menu click to select Desktop and then
click Save. The file will download to your desktop.
5. If a Download Complete window appears, click Close. A new icon
appears on your desktop.

Hard Drive Installation

1. Double-click the new icon on the desktop labeled EZ501902.exe.
2. When the Self-Extractor window appears, click Continue.
3. A dialog box will prompt you for the directory to unzip the files to.
Normally you should leave the default path. This path must be on an
MS-DOS FAT partition. If you extract the files to any other type of
partition (for example NTFS) you will not be able to run the diagnostics.
Write down the path where the files were placed.
4. Click OK.
5. If you get a prompt asking you if you would like to create the
directory, click YES.
6. After a few seconds a dialog box will appear that says that all files
were successfully unzipped. Click OK to exit from the installer.

Running the Diagnostics from a Hard Drive

1. In order to run the diagnostics you must boot to an MS-DOS prompt.
If necessary create a DOS boot disk. For more information, refer to
Dell Knowledge Base Article TT1014475 - "What can I use for a boot
disk with CD-ROM support?"
2. Insert the floppy disk into the floppy drive and reboot the computer.
3. At the A:/> prompt, type "C:" (or the drive letter where you saved
the diagnostics to) and then press the [ENTER] key.
4. Type "cd c:\dell\drivers\R55864" (or the path that you specified
above) and then press [ENTER].
5. Type "Delldiag" and then press [ENTER] to run the diagnostics.
6. Follow the on-screen instructions.