Dateien herunterladen
Dateiformat: Diese Datei umfasst einen Satz komprimierter oder gezippter Dateien. Laden Sie die ZIP-Datei in einen Ordner auf der Festplatte herunter und entpacken Sie sie mit einem Doppelklick. Befolgen Sie die Anweisungen, um die Installation abzuschließen.
Dateiname: PC200_20003B00_ZPE.exe
Dateigröße: 1.61 MB
Um die Integrität Ihres Downloads zu sichern, prüfen Sie bitte den Prüfsummenwert.
MD5: 025153c7142eba7ad4fa61d9bf3fab3e
SHA1: e266b1ce2808f7c687182cebac6df306ebea93c7
SHA-256: 96779c2ff55e60d86a16a9882444c5c09f3685789f162cb34146053810b516e5
Fehlerkorrekturen und Verbesserungen
Fixes the Windows 10 upgrade install timeout
Wichtige Informationen
1. Please backup data in the SSD, or at least make copies of all important files stored in the SSD before executing this firmware update.
2. No data loss is expected if the firmware update is executed properly according to the update instructions.
3. Data loss or system malfunction may result if the firmware update process is interrupted for any reason.
4. This firmware update shall be executed entirely at your own risk.
Unterstützte Betriebssysteme
Windows 7, 32-bit
Windows 7, 64-bit
Windows 8, 32-bit
Windows 8, 64-bit
Windows 8.1, 32-bit
Windows 8.1, 64-bit
Windows 10, 32-bit
Windows 10, 64-bit
Installationsanweisungen
Download
1. Click Download File and follow the remaining prompts to download the file.
2. When the File Download window appears, click Run to unzip the download package into your hard drive.
3. The file explorer will open pointing to the directory containing the download package. Please take note of the path.
------------------------------------------------------------------------------------------
ATTENTION
1. Backup the SSD.
2. Switch to AC Power
Firmware upgrade through the Windows utility
Procedure
1. Go to the directory containing the download package as noted above.
2. Run the firmware update utility with administrator privilege (right-click on the executable, then select "Run as administrator").
3. Follow the on-screen instructions.
4. Select the target SSD for firmware upgrade.
5. Click on "FW Update" button.
6. Follow the on-screen instructions.
7. DO NOT interrupt the firmware update. A dialog box will pop up when the firmware update is completed.
8. Please reboot your system.
------------------------------------------------------------------------------------------
Firmware upgrade using the bootable image
1. An ISO image is provided in the download package. Use that image to create a bootable USB thumb drive. You may want to consider using UNetBootin
2. Boot the system from the USB thumb drive created in Step 1.
3.Your PC will boot up with Linux booting screen and it displays SSDs that connected to your PC.
4. The FW update tool will seek SK hynix PC200 SSD. If the tool find a SK hynix PC200, it will start to update automatically, if not it displays an error message.
5. After successful FW update, PC will shutdown after about 10 sec.
1. Prepare a USB thumb drive
(1) USB storage and ISO image Writer(like UNetBootin) are needed for updating SSD FW with this package.
(2) Run unetbootin-windows-608.exe
(3) Check 'DiskImage' button and select path to ISO file using the ' ... ' option button.
(4) If USB Drive is ready, then UNetbooin will show the driver letter.
(5) Select OK to copy ISO bootable image to USB thumb drive
(6) Once installation is completed, please follow the next steps on UNetbootin Window.
*.Installation Instructions
: For the detail usage of this package, Please refer to the attached Update Tool Manual.
Reboot will be required