Intel E7500 Chipsatz, A00
Installiert Diese Datei wurde automatisch im Rahmen einer vor Kurzem erfolgten Aktualisierung installiert. Wenn Probleme auftreten, können Sie die Datei manuell herunterladen und erneut installieren.Der Inhalt dieser Seite wurde möglicherweise automatisch übersetzt. Füllen Sie das Formular unten auf der Seite aus, um Feedback zu geben.
Intel E-7500 chipset INF file for PE 2600
Empfohlen
Kompatibilität prüfen
Bitte geben Sie Ihre Produktdetails ein, um die neuesten Treiberinformationen für Ihr System anzuzeigen.Dell Service-Tag-Nummer oder Modell eingeben
Sie möchten Ihr Produkt suchen? Geben Sie eine Produktkennung ein. Anleitung
Dieser Treiber ist nicht kompatibel.
Dieser Treiber ist für das ausgewählte Produkt nicht verfügbar. Wählen Sie ein anderes Produkt aus, um Ihre Produktdetails für diesen Treiber erneut einzugeben, oder besuchen Sie die Seite Produktsupport, um alle Treiber für ein anderes Produkt anzuzeigen.
Melden Sie sich bei Windows als AdministratorIn an, um den automatischen Scan zu nutzen. Wenn Sie bereits als AdministratorIn angemeldet sind und diese Meldung angezeigt wird, führen Sie einen Neustart durch. Ihr System wird von Ihrem IT-Administrator verwaltet und die Funktionen sind möglicherweise eingeschränkt.
Weitere Updates finden. Nutzen Sie SupportAssist, um alle aktuellen Treiberupdates für Ihr Gerät zu finden.
Fehlerkorrekturen und Verbesserungen
This driver will clear the yellow warnings in the System Device Manager
with Windows 2000. The warnings are associated with the Intel E7500 chip
set.
Mehr erfahrenwith Windows 2000. The warnings are associated with the Intel E7500 chip
set.
Version
A00, A00
Veröffentlichungsdatum:
04 Nov. 2002
Downloadtyp:
Treiber
Kategorie
Chipsatz
Wichtigkeit
OptionalDell Technologies empfiehlt, dieses Update zu überprüfen, um festzustellen, ob es für Ihr System gilt. Das Update enthält Änderungen, die sich nur auf bestimmte Konfigurationen auswirken, oder bietet neue Funktionen, die für Ihre Umgebung gelten können aber nicht müssen.
Verfügbare Formate Wichtige Informationen anzeigen
Dateiformat: Extrahiert Dateien direkt auf die lokale Festplatte
Dateiname: P64H2A00.exe
Dateigröße: 24.61 KB
Dies ist eine große Datei. Abhängig von Ihrer Verbindungsgeschwindigkeit kann das Herunterladen einige Zeit in Anspruch nehmen.
Beschreibung des Dateiformats:
Dieses Dateiformat umfasst ein Dateiarchiv, das in einem Verzeichnis auf der Festplatte dekomprimiert werden kann. Die Installation kann anschließend von diesem Verzeichnis aus durchgeführt werden.
Um die Integrität Ihres Downloads zu sichern, prüfen Sie bitte den Prüfsummenwert.
Mit dem Download stimmen Sie der Dell Softwarelizenzvereinbarung (in Englisch) zu.
Wichtige Informationen
This procedure is only for the Dell Power Edge 2600 systems.
Unterstützte Betriebssysteme
Windows 2000
Installationsanweisungen
PE 2600 INTEL E7500 CHIP SET DRIVER INSTALLATION INSTRUCTIONS FOR W2K
0. Print a copy of these instructions to use as a reference while
installing the driver.
1. Download the file P64H2A00.EXE to a temporary directory on your hard
drive. This file is a self-extracting executable.
2. Execute the downloaded file by double clicking it. This will allow you
to extract the two files archived in P64h2A00.EXE to C:\WINNT\TEMP. By
following the on-screen instructions, you may specify an alternate
directory when the file is executed.
3. Two files, p64h2.cat and p64h2.inf, will be extracted to the directory
that you specified in Step 2.
4. To install the new driver, first click on the Start Button.
5. Then go to "Settings" and click on "Control Panel".
6. Next, double click the "System" icon.
7. With the "System Properties" window now open, click on the "Hardware"
tab.
8. Under the "Hardware" tab, click on the button entitled "Device
Manager..." The "Device Manager" window will open.
9. In the "Device Manager" window, click on the '+' sign next to "System
devices" to expand the list of System devices.
9. In the "System devices" list, look for devices labeled as "Intel(R)
P64H2 PCI to PCI Bridge - 1460". The following steps will have to be
performed for each of the devices labeled as "Intel(R) P64H2 PCI to PCI
Bridge - 1460".
10. Double click on a device that is labeled as "Intel(R) P64H2 PCI to
PCI Bridge - 1460" to open its Properties window.
11. In the "Intel(R) P64H2 PCI to PCI Bridge - 1460 Properties" window,
click on the "Driver" tab.
12. Under the "Driver" tab, click on the "Update Driver..." button. This
will open the "Upgrade Device Driver Wizard" window.
13. In the "Upgrade Device Driver Wizard" window, click the "Next >"
button.
14. In the "Upgrade Device Driver Wizard" window, under "What do you want
the wizard to do?", select "Display a list of the known drivers for this
device so that I can choose a specific driver" and then click the "Next
>" button.
15. In the "Upgrade Device Driver Wizard" window, under "Select a Device
Driver", click the "Have Disk..." button. This will open the "Install
From Disk" window
16. In the "Install From Disk" window, click the "Browse..." button.
This will open the "Locate File" window.
17. In the "Locate File" window, under "Look in:", navigate to the
directory that you specified in Step 2 in order to locate the file
p64h2.inf. Once the correct directory path is specified, click on the
file p64h2.inf. This will cause "p64h2.inf" to appear in the "File
name:" field. Once this has occurred, click the "Open" button.
The "Locate File" window will close.
18. In the "Install From Disk" window, the "Copy manufacturer's files
from:" field will now contain the directory path that you specified in
Step 17. Be certain that it is the same directory path that you
specified in Step 2. If it is not, repeat Steps 16 and 17. If it is,
click the "OK" button.
19. In the "Update Device Driver Wizard" window, under "Models:",
click "Intel(R) P64H2 PCI to PCI Bridge - 1460" to highlight it. Then
click the "Next >" button.
20. The "Update Device Driver Window" will now report the following
message. "The wizard is ready to install the driver for the following
hardware device: Intel(R) P64H2 PCI to PCI Bridge - 1460". Click
the "Next >" button.
21. The "Update Device Driver Window" will now report the following
message. "Windows has finished installing the software for this device.
To close this wizard, click Finish." Click the "Finish" button.
22. In the "Intel(R) P64H2 PCI to PCI Bridge - 1460 Properties" window,
click the "Close" button.
23. Repeat Steps 10 through 22 for all "Intel(R) P64H2 PCI to PCI Bridge -
1460" devices listed under "System devices" in the Device Manager
window.
24. After the drivers have been installed for all
0. Print a copy of these instructions to use as a reference while
installing the driver.
1. Download the file P64H2A00.EXE to a temporary directory on your hard
drive. This file is a self-extracting executable.
2. Execute the downloaded file by double clicking it. This will allow you
to extract the two files archived in P64h2A00.EXE to C:\WINNT\TEMP. By
following the on-screen instructions, you may specify an alternate
directory when the file is executed.
3. Two files, p64h2.cat and p64h2.inf, will be extracted to the directory
that you specified in Step 2.
4. To install the new driver, first click on the Start Button.
5. Then go to "Settings" and click on "Control Panel".
6. Next, double click the "System" icon.
7. With the "System Properties" window now open, click on the "Hardware"
tab.
8. Under the "Hardware" tab, click on the button entitled "Device
Manager..." The "Device Manager" window will open.
9. In the "Device Manager" window, click on the '+' sign next to "System
devices" to expand the list of System devices.
9. In the "System devices" list, look for devices labeled as "Intel(R)
P64H2 PCI to PCI Bridge - 1460". The following steps will have to be
performed for each of the devices labeled as "Intel(R) P64H2 PCI to PCI
Bridge - 1460".
10. Double click on a device that is labeled as "Intel(R) P64H2 PCI to
PCI Bridge - 1460" to open its Properties window.
11. In the "Intel(R) P64H2 PCI to PCI Bridge - 1460 Properties" window,
click on the "Driver" tab.
12. Under the "Driver" tab, click on the "Update Driver..." button. This
will open the "Upgrade Device Driver Wizard" window.
13. In the "Upgrade Device Driver Wizard" window, click the "Next >"
button.
14. In the "Upgrade Device Driver Wizard" window, under "What do you want
the wizard to do?", select "Display a list of the known drivers for this
device so that I can choose a specific driver" and then click the "Next
>" button.
15. In the "Upgrade Device Driver Wizard" window, under "Select a Device
Driver", click the "Have Disk..." button. This will open the "Install
From Disk" window
16. In the "Install From Disk" window, click the "Browse..." button.
This will open the "Locate File" window.
17. In the "Locate File" window, under "Look in:", navigate to the
directory that you specified in Step 2 in order to locate the file
p64h2.inf. Once the correct directory path is specified, click on the
file p64h2.inf. This will cause "p64h2.inf" to appear in the "File
name:" field. Once this has occurred, click the "Open" button.
The "Locate File" window will close.
18. In the "Install From Disk" window, the "Copy manufacturer's files
from:" field will now contain the directory path that you specified in
Step 17. Be certain that it is the same directory path that you
specified in Step 2. If it is not, repeat Steps 16 and 17. If it is,
click the "OK" button.
19. In the "Update Device Driver Wizard" window, under "Models:",
click "Intel(R) P64H2 PCI to PCI Bridge - 1460" to highlight it. Then
click the "Next >" button.
20. The "Update Device Driver Window" will now report the following
message. "The wizard is ready to install the driver for the following
hardware device: Intel(R) P64H2 PCI to PCI Bridge - 1460". Click
the "Next >" button.
21. The "Update Device Driver Window" will now report the following
message. "Windows has finished installing the software for this device.
To close this wizard, click Finish." Click the "Finish" button.
22. In the "Intel(R) P64H2 PCI to PCI Bridge - 1460 Properties" window,
click the "Close" button.
23. Repeat Steps 10 through 22 for all "Intel(R) P64H2 PCI to PCI Bridge -
1460" devices listed under "System devices" in the Device Manager
window.
24. After the drivers have been installed for all
Treiber – Hilfe und Lernprogramme
Weitere Downloads finden Sie unter Treiber und Downloads. Hilfe für die Verwendung der Informationen auf dieser Seite finden Sie hier: Treiber – Hilfe und Tutorials.