Dateien herunterladen
Dateiformat: Dieses Dateiformat umfasst eine unter BIOS ausführbare Datei. Das universelle (Windows/MS-DOS) Format kann zur Installation aus jeder Windows oder MS DOS-Umgebung verwendet werden.
Dateiname: Inspiron 660 Vostro 270 BIOS A11.exe
Dateigröße: 12.81 MB
Um die Integrität Ihres Downloads zu sichern, prüfen Sie bitte den Prüfsummenwert.
MD5: 156a8021726830f274fd2189ddee7586
SHA1: 171b4eb541d9222a027a676202604092e6c56cfa
SHA-256: 07ca8b10dfa447bfe06c3e79bc66dd19f5f5328ed4e90fd274c381f8859678ce
Fehlerkorrekturen und Verbesserungen
Fixes
-Not Applicable.
Enhancements
-Update ME firmware to 8.1.40.1416.
Unterstützte Betriebssysteme
Installationsanweisungen
BIOS Update Executable for Windows/DOS
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if Legacy Boot mode(Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select USB Storage Device and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if UEFI Boot mode with Load Legacy Option disabled (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to Boot > Boot List Option
3. Change UEFI to Legacy of Boot List Option
4. Go to Exit > Exit Save Changes and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. DOS System will auto restart and update BIOS while system startup screen.
8. After BIOS update finished, system will auto reboot.
9. Go to BIOS Setup by pressing pressing F2 and go to Boot > Boot List Option
10. Change Legacy to UEFI Boot Option.
11. Go to Exit > Exit Save Changes and reboot system
--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
Reboot will be required
Gilt für
Dell Inspiron 660 / Vostro 270