Dell PowerConnect 8024/8024F, Firmware-Version 5.1.7.5 (A23)

Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "PowerConnect_5.1.7.5_Release_Notes".

Please follow software update instructions included in the zip file - "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.7.5 Firmware.pdf".

Fixes available in this release:
CaseID Summary
809263 Add dhcp option 42 support
832552 M6348 running 5.1.5.1 DIR timestamps and PowerSupply output incorrect
841131 PCT8024-F stack: Not possible to create port-channels on combo ports
822311 PCM8024 v5.1.4.5 management SSH connetions time out in simple mode
839617 M8024-K External uplink Ethernet ports on standby member are not listed under stack-ports.
842815 5.1.6.1-SNMP MIB for Power Supply and Fan Tray info of all units in the stack
842812 5.1.6.1 - boxServicesTempSensorsTable MIB walk doesn't match with "show system temperature"
844287 5.1.6.1 - Incorrect status message when downloading image via FTP
844298 5.1.6.1 - Terminal length CLI command suggest to use range <31-1>
841131 PC8024F : Unable to add ports in to port-channel across the stack when ports are down (tranceivers not inserted in to ports)
846490 PCM6348: 'show passwords result' output is incorrect
846987 PCM6220: After deletion of vlan, the member port is not added back into the default vlan
846203 Link flap when attempt to change the speed which is not supported
849935 Unable to enable/disable HTTPS from WebUI.
848345 Debug logs prints a wrong message. It says the "New user has been added" when it is not
848996 gvrp registration-forbid is not working if there are two interfaces b/w GVRP client and Server
848723 PCM6220: Inconsistent error message between WebUI and CLI for GARP Join Timer
845272 5.1.6.1 - PC7000/PC8024/M-Series - Multiple OpenSSH Vulnerabilities
848639 PCM6348: WebUI pops up error on adding SNMP community but still adds the community
859309 5.1.5.1 - Stack failover forces the combo ports of the standby unit to "Duplex Full"
859311 5.1.5.1 - Unable to remove duplex setting on switch-ports
870039 POODLE Vulnerability
871623 PCM8024-k - Inconsistency in output of 'show link-dependency'
870337 N20xx v6.1.1.7 port-channel misconfigured after reloading the switch
847890 User password length is not checked when using the Easy Setup Wizard.

Enhancements available in this release:
None

(1) Download the zip file - PC8024v5.1.7.5a23.zip
(2) Extract the image file "PC8024v5.1.7.5.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.7.5 Firmware.pdf" extracted from zip file.

Reboot will be required