Dell EMC Networking N2000 Series Firmware Version 6.6.0.13
Απαιτείται επανεκκίνησηΕγκαταστάθηκεΑυτό το αρχείο εγκαταστάθηκε αυτόματα στο πλαίσιο μιας πρόσφατης ενημέρωσης. Αν αντιμετωπίζετε κάποιο πρόβλημα, μπορείτε να κάνετε μη αυτόματη λήψη και επανεγκατάσταση.
Το περιεχόμενο αυτής της σελίδας μπορεί να έχει μεταφραστέι αυτόματα. Για να υποβάλετε σχόλια, συμπληρώστε τη φόρμα στο κάτω μέρος της σελίδας.
Αυτό το αρχείο εγκαταστάθηκε αυτόματα στο πλαίσιο μιας πρόσφατης ενημέρωσης. Αν αντιμετωπίζετε κάποιο πρόβλημα, μπορείτε να κάνετε μη αυτόματη λήψη και επανεγκατάσταση.
If N2000 series switch has an earlier version of firmware (6.0.0.7 or 6.0.0.8 or 6.0.1.3), upgrade switch to the latest version of firmware 6.6.0.10 as it contains multiple bug fixes.
New CPLD version 20 is available in release 6.5.1.1 and later (6.6.0.13) for N2000 Series switches. After upgrading the switches to FW version 6.5.1.1 and later (6.6.0.13), the CPLD can be updated to version 20 from CLI using the command - "update cpld". To update CPLD on stack members, run - 'update cpld ' command from stack master. Please DO NOT power-cycle the switch when CPLD update is in progress. After CPLD update is complete, the switch will reset on it's own. Verify CPLD Version with the command - 'show version' from CLI after switch boot-up completes.
****Below information is applicable ONLY for N2000 switches upgraded to 6.6.0.13 and CPLD Version 15 or 17 or 20 and attempt to downgrade to any prior FW version****
Downgrading N3000 and N2000 Series switches from firmware version 6.6.0.13 with the updated CPLD version 15 or 17 or 20 (Verify CPLD Version with the command “show version” from CLI) to any prior 6.x.x.x version can ONLY be done by downgrading via interim FW version B.6.3.2(N3000_N2000vB.6.3.2.stk) attached to zip file.
With interim FW image version B.6.3.2 running, the switches should be downgraded to CPLD version 13 first before downgrading to any 6.x.x.x version. Please follow the instructions documented in the “Firmware Downgrade” section of "Upgrading Dell EMC Networking N2000 Series Switches From Version 6.x.x.x to 6.6.0.13" procedure.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell_EMC_Networking_6.6.0.13_6.6.0.43_ReleaseNotes_N1100_N1500_N2000_N2128PX_N3000E_N3132PX.pdf"
Συνιστάται
Έλεγχος συμβατότητας
Εισαγάγετε τις λεπτομέρειες του προϊόντος σας για να δείτε τις πιο πρόσφατες πληροφορίες για το πρόγραμμα οδήγησης του συστήματός σας
Εισαγάγετε την ετικέτα εξυπηρέτησης ή το μοντέλο της Dell
Θέλετε να αναζητήσετε το προϊόν σας; Εισαγάγετε ένα αναγνωριστικό προϊόντος.Δείξτε μου πώς
Δεν προέκυψαν αποτελέσματα.Δεν μπορέσαμε να βρούμε τίποτα για την αναζήτησή σας. Τροποποιήστε την αναζήτησή σας για να εισαγάγετε μια ετικέτα εξυπηρέτησης (B959FS3) ή ένα μοντέλο (Latitude 5540) και δοκιμάστε ξανά.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Συνδεθείτε στα Windows ως διαχειριστής για να χρησιμοποιήσετε τις δυνατότητες αυτόματης σάρωσης. Αν έχετε ήδη συνδεθεί ως διαχειριστής και βλέπετε αυτό το μήνυμα, κάντε επανεκκίνηση.Η διαχείριση του συστήματός σας γίνεται από τον διαχειριστή IT και οι δυνατότητες μπορεί να είναι περιορισμένες.
Βρείτε περισσότερες ενημερώσεις. Χρησιμοποιήστε το SupportAssist για να βρείτε όλες τις τελευταίες ενημερώσεις προγραμμάτων οδήγησης για τη συσκευή σας.
Fixes & Enhancements
Fixes: FIELD-3918/CS8566096-Unable to Ping/Telnet management IP (VLAN 154) with multicast traffic on the same VLAN FIELD-4319/CS9227198-Unexpected additional characters show for OID: .1.3.6.1.4.1.674.10895.3000.1.2.100.1.0 FIELD-4325/CS9238760-Asset tag field value not retained after switch reload CS9253824-Devshell command to check the supported ciphers and mac is missing FIELD-4321/CS9239501-Higher level ciphers not available in SNMP CS9249896-Upgrade HiveAgent to version 1.1.29.0 - N1100/N1500/N2000/N2100/N3000/N3000E/N3132PX-ON Internal-Crash dump output gets truncated due to stack debug dumps
Η Dell Technologies συνιστά την εφαρμογή αυτής της ενημέρωσης κατά τον επόμενο προγραμματισμένο κύκλο ενημέρωσης. Στην ενημέρωση περιλαμβάνονται αλλαγές για να διατηρηθεί η γενική εύρυθμη λειτουργία του συστήματος. Εξασφαλίζει ότι το λογισμικό του συστήματος παραμένει ενημερωμένο και συμβατό με άλλες μονάδες συστήματος (υλικολογισμικό, BIOS, προγράμματα οδήγησης και λογισμικό) και μπορεί να περιλαμβάνει κι άλλες, νέες δυνατότητες.
Μορφή αρχείου:Τα αρχεία εξάγονται απευθείας σε τοπικό δίσκο
Όνομα αρχείου:N2000v6.6.0.13.A03.zip
Μέγεθος αρχείου:179.05 MB
Αυτό είναι μεγάλο αρχείο. Ανάλογα με την ταχύτητα της σύνδεσής σας, η λήψη μπορεί να διαρκέσει λίγη ώρα.
Περιγραφή μορφής:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Fixes: FIELD-3918/CS8566096-Unable to Ping/Telnet management IP (VLAN 154) with multicast traffic on the same VLAN FIELD-4319/CS9227198-Unexpected additional characters show for OID: .1.3.6.1.4.1.674.10895.3000.1.2.100.1.0 FIELD-4325/CS9238760-Asset tag field value not retained after switch reload CS9253824-Devshell command to check the supported ciphers and mac is missing FIELD-4321/CS9239501-Higher level ciphers not available in SNMP CS9249896-Upgrade HiveAgent to version 1.1.29.0 - N1100/N1500/N2000/N2100/N3000/N3000E/N3132PX-ON Internal-Crash dump output gets truncated due to stack debug dumps
(1) Download the zip file - N2000v6.6.0.13.A03.zip (2) Extract the image file "N2000Stdv6.6.0.13.stk" from the zip file (3) Install the image to the switch by following the upgrade procedure "Upgrading Dell EMC Networking N2000 Series Switches From version 6.x.x.x to 6.6.0.13 Firmware.pdf" extracted from zip file.
Χρειάζεστε βοήθεια με προβλήματα σύνδεσης δικτύου;
Βρείτε μια λύση στον οδηγό αντιμετώπισης προβλημάτων δικτύου της Dell