Dell EMC iDRAC Service Module Installer for OS DUP, v3.4.0
ΕγκαταστάθηκεΑυτό το αρχείο εγκαταστάθηκε αυτόματα στο πλαίσιο μιας πρόσφατης ενημέρωσης. Αν αντιμετωπίζετε κάποιο πρόβλημα, μπορείτε να κάνετε μη αυτόματη λήψη και επανεγκατάσταση.
Το περιεχόμενο αυτής της σελίδας μπορεί να έχει μεταφραστέι αυτόματα. Για να υποβάλετε σχόλια, συμπληρώστε τη φόρμα στο κάτω μέρος της σελίδας.
Αυτό το αρχείο εγκαταστάθηκε αυτόματα στο πλαίσιο μιας πρόσφατης ενημέρωσης. Αν αντιμετωπίζετε κάποιο πρόβλημα, μπορείτε να κάνετε μη αυτόματη λήψη και επανεγκατάσταση.
iDRAC Service Module (iSM) is a lightweight software service that better integrates operating system (OS) features with iDRAC and can be installed on Dell’s 12th or later generation of PowerEdge servers. iSM provides OS-related information to the iDRAC and adds capabilities such as LC log event replication into the OS log, WMI support (including storage), iDRAC SNMP alerts via OS, iDRAC hard reset and remote full Power Cycle. iSM automates SupportAssist report collection process for iDRAC leading to faster issue resolution. iSM has very little impact on the host processor and smaller memory footprint than "in-band" agents such as Dell EMC OpenManage Server Administrator (OMSA), thus expanding iDRAC management into supported host operating systems.
Συνιστάται
Έλεγχος συμβατότητας
Εισαγάγετε τις λεπτομέρειες του προϊόντος σας για να δείτε τις πιο πρόσφατες πληροφορίες για το πρόγραμμα οδήγησης του συστήματός σας
Εισαγάγετε την ετικέτα εξυπηρέτησης ή το μοντέλο της Dell
Θέλετε να αναζητήσετε το προϊόν σας; Εισαγάγετε ένα αναγνωριστικό προϊόντος.Δείξτε μου πώς
Δεν προέκυψαν αποτελέσματα.Δεν μπορέσαμε να βρούμε τίποτα για την αναζήτησή σας. Τροποποιήστε την αναζήτησή σας για να εισαγάγετε μια ετικέτα εξυπηρέτησης (B959FS3) ή ένα μοντέλο (Latitude 5540) και δοκιμάστε ξανά.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Συνδεθείτε στα Windows ως διαχειριστής για να χρησιμοποιήσετε τις δυνατότητες αυτόματης σάρωσης. Αν έχετε ήδη συνδεθεί ως διαχειριστής και βλέπετε αυτό το μήνυμα, κάντε επανεκκίνηση.Η διαχείριση του συστήματός σας γίνεται από τον διαχειριστή IT και οι δυνατότητες μπορεί να είναι περιορισμένες.
Βρείτε περισσότερες ενημερώσεις. Χρησιμοποιήστε το SupportAssist για να βρείτε όλες τις τελευταίες ενημερώσεις προγραμμάτων οδήγησης για τη συσκευή σας.
Fixes & Enhancements
Fixes:
Applicable for Microsoft Windows OS only. - Fix for ASR event "Watchdog Timer Expired" that will be logged when Windows Management Instrumentation is not running on the host OS.
Applicable for Linux OS only. - iSM will now only enable ip_forward global settings on the host OS only when iDRAC Access via Host OS feature is enabled.
Enhancements:
For Windows & Linux: - TLS protection enabled for securing iSM to iDRAC communication over OS-BMC Pass-through. - Single sign-on(SSO) to iDRAC GUI from Host OS administrator's desktop.
For Windows OS only: - SupportAssist Auto Dispatch for Disks (for below two events) - Microsoft Windows only. - Predictive failure reported for physical disk. - A bad disk block on [device] cannot be reassigned during a write operation.
For Linux OS only: - iSM now also allows IPv6 communication between iSM to iDRAC over OS-BMC Pass-through on Linux Operating Systems.
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Όνομα αρχείου:Systems-Management_Application_6Y06X_LN64_3.4.0_A00.BIN
Μέγεθος αρχείου:5.71 MB
Αυτό είναι μεγάλο αρχείο. Ανάλογα με την ταχύτητα της σύνδεσής σας, η λήψη μπορεί να διαρκέσει λίγη ώρα.
Περιγραφή μορφής:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update. Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
For Microsoft Windows: Download 1. Click the Download File link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Double click the downloaded .EXE file and click the "Install" button.
For Linux: 1. Click the Download File link to download the file. 2. Copy the file to the host OS.
Installation 1. Run the .bin file as a root user.
NOTE: This DUP silently installs only default iSM components. To add or reconfigure other iSM features after install launch /opt/dell/srvadmin/iSM/sbin/dcism-setup.sh
Βοήθεια και εκπαιδευτικό υλικό για προγράμματα οδήγησης