Actiontec Controller based V.90 PCI Modem, v. 01, A01
Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This package is to set the irq and port value for ActionTec modem in Linux RH7.1SBE. It has modem_setup.sh, modem.sh, and readme.txt files.
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Sets up ActionTec PCI controller-based modem as /dev/modem.
Read MoreVersion
01, A01
Release date
03 Aug 2001
Download Type
Utility
Category
Modem/Communications
Importance
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Available formats
File Format: A tar file for software installation
File Name: at_modem.tar.gz
File Size: 758 Bytes
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file is an archive of compressed files for software installation.
To ensure the integrity of your download, please verify the checksum value.
By downloading, you accept the terms of the Dell Software License Agreement.
Supported Operating Systems
Red Hat® Linux 7.1
Installation instructions
Download at_modem.tar.gz into your floppy, insert the floppy into your system, and follow the steps below:
mount -t vfat /dev/fd0 /mnt/floppy
cp /mnt/floppy/at_modem.tar.gz /tmp
cd /tmp
tar -xvzf at_modem.tar.gz
./modem_setup.sh
/etc/rc.local
umount /mnt/floppy
mount -t vfat /dev/fd0 /mnt/floppy
cp /mnt/floppy/at_modem.tar.gz /tmp
cd /tmp
tar -xvzf at_modem.tar.gz
./modem_setup.sh
/etc/rc.local
umount /mnt/floppy
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.