Dell EMC Networking N2000 Series Firmware Version 6.7.0.4

Restart required
Driver Id : V264J
Importance : Optional
Version : 6.7.0.4, A00 Latest version Recommended version Latest and Recommended version
Release Date : 24 Jun 2021
Download Type : Firmware
Category : Network, Ethernet & Wireless
Mixed Stacking – N2000 series switches with N2128PX-ON not Supported in OS6.7.0.3

If N2000 series switch has an earlier version of firmware (6.0.0.7 or 6.0.0.8 or 6.0.1.3), upgrade switch to the latest version of firmware 6.6.0.24 as it contains multiple bug fixes.

New CPLD version 20 is available in release 6.5.1.1 and later (6.6.0.24) for N2000 Series switches. After upgrading the switches to FW version 6.5.1.1 and later (6.6.0.24), the CPLD can be updated to version 20 from CLI using the command - "update cpld". To update CPLD on stack members, run - 'update cpld ' command from stack master. Please DO NOT power-cycle the switch when CPLD update is in progress. After CPLD update is complete, the switch will reset on it's own. Verify CPLD Version with the command - 'show version' from CLI after switch boot-up completes.

****Below information is applicable ONLY for N2000 switches upgraded to 6.6.0.24 and CPLD Version 15 or 17 or 20 and attempt to downgrade to any prior FW version****

Downgrading N3000 and N2000 Series switches from firmware version 6.6.0.24 with the updated CPLD version 15 or 17 or 20 (Verify CPLD Version with the command “show version” from CLI) to any prior 6.x.x.x version can ONLY be done by downgrading via interim FW version B.6.3.2(N3000_N2000vB.6.3.2.stk) attached to zip file.

With interim FW image version B.6.3.2 running, the switches should be downgraded to CPLD version 13 first before downgrading to any 6.x.x.x version. Please follow the instructions documented in the “Firmware Downgrade” section of "Upgrading Dell EMC Networking N2000 Series Switches From Version 6.x.x.x to 6.6.0.24.pdf" file.

Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell_EMC_Networking_6.6.0.24_6.6.0.54_ReleaseNotes_N1100_N1500_N2000_N2128PX_N3000E_N3132PX.pdf".

Download Files

File Format: This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
File Name: N2000v6.7.0.4.A00.zip
File size: 65.46 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 502da93edaaa6c93905385f47be4c0ca
SHA1: d4b412a2b6ceb5acb653eb442922717187a967a4
SHA-256: c02a051556df30f29f1172a1a56ace16218a06f0bccdde452ee4630c2738dd56
Download .ZIP
File Name: Dell_EMC_Networking_6.7.0.4_6.7.0.34_ReleaseNotes (N1100 N1500 N2000 N2128PX N3000E N3132PX Series Switches).pdf
File size: 1.7 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 37fb9c2fb9ff28b2245fa423f4f92495
SHA1: 44b3b3a09d66bc05f48af3c430e3eb1a20a29d86
SHA-256: c15ee080b682aab27a1630cea07e2bd6b433bdff07335bc2a21329645860b308
Download .PDF