Seagate CAJC for model numbers ST1000NM004A-2MN130, ST2000NM012A-2MP130, ST4000NM016A-2HZ130
Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This release contains firmware version CAJC for STX model numbers ST1000NM004A-2MN130, ST2000NM012A-2MP130, ST4000NM016A-2HZ130. Capacity of 1TB,2TB and 4TB
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes:
-Fix an issue where inaccurate write timing can cause unrecoverable read error
-Fix an issue where SMART error can result after a firmware download
-Fix the issue where SANITIZE does not resume after host reset
-Fix issues where assert can result
-Fix issues where hang condition can result
-Fix issues where command timeout can result
-Fix issues where command abort can result
-Fix an issue where IOEDC error can result
Enhancements:
-Improve reliability features
-Improve event logging/sense data reporting accuracy
-Improve throughput performance for specific workloads
-Improve recovery paths for various error situations
Read More-Fix an issue where inaccurate write timing can cause unrecoverable read error
-Fix an issue where SMART error can result after a firmware download
-Fix the issue where SANITIZE does not resume after host reset
-Fix issues where assert can result
-Fix issues where hang condition can result
-Fix issues where command timeout can result
-Fix issues where command abort can result
-Fix an issue where IOEDC error can result
Enhancements:
-Improve reliability features
-Improve event logging/sense data reporting accuracy
-Improve throughput performance for specific workloads
-Improve recovery paths for various error situations
Version
CAJC, A00
Release date
12 Jun 2020
Download Type
Firmware
Category
Storage
Importance
UrgentDell Technologies highly recommends applying this important update as soon as possible. The update contains critical bug fixes and changes to improve functionality, reliability, and stability of your Dell system. It may also include security fixes and other feature enhancements.
Available formats View Important Information
File Format: Update Package for MS Windows 64-Bit.
File Name: Serial-ATA_Firmware_179WV_WN64_CAJC_A00.EXE
File Size: 10.6 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages in native Microsoft Windows 64-bit format do not require that Microsoft WOW64 be installed on the Microsoft Windows Server.
To ensure the integrity of your download, please verify the checksum value.
MD5:
1a879bcaf01e41a0748933e23dc5028f
SHA1:
a9778c7d95c88c5806736434ef22b97851dc87c8
SHA-256:
e358f2aa77d3f003ca1c286e4d5692677939425d2610a7c829c379deb622b6b2
File Format: A GnuPG file which contains a cryptographic signature
File Name: Serial-ATA_Firmware_179WV_LN_CAJC_A00.BIN.sign
File Size: 226 Bytes
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
To ensure the integrity of your download, please verify the checksum value.
MD5:
ccfcc13a0e33ae8f8a39ba2385f6c9d8
SHA1:
7d37d37f0f3f8691cdb41917095b5f37531f333f
SHA-256:
5fa838cef808813bbae8a659c1508c1fe12ed0eb276fcb9d7646b1af34cbbace
File Format: Update Package for MS Windows 32-Bit
File Name: Serial-ATA_Firmware_179WV_WN32_CAJC_A00.EXE
File Size: 9.4 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
To ensure the integrity of your download, please verify the checksum value.
MD5:
69cc51558a66b2671ac708b63744a3b7
SHA1:
4ab62048472bfdbadf89a21424dac909a40fe2f9
SHA-256:
9ea146f76c78d1fd566f854327e4cceb3bcbc2fcff980ca9b4cd43c6d64f2499
File Format: Update Package for Red Hat Linux
File Name: Serial-ATA_Firmware_179WV_LN_CAJC_A00.BIN
File Size: 6.23 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
To ensure the integrity of your download, please verify the checksum value.
MD5:
58f150250e4f68188b388838c0515fac
SHA1:
68fcbc9edcc6cb18a3560426757c8719e05466c3
SHA-256:
2fab4a628f3afb13e09383c0932659c7dc21d55b2c46032d88b26d7d43ab0ff7
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
Supported Operating Systems
Windows Server 2008 x64
Windows Server 2012
Not Applicable
Red Hat® Enterprise Linux 6
Red Hat® Enterprise Linux 7
Red Hat® Ent Linux 5
Red Hat® Enterprise Linux 8
Windows Server 2012 R2
Windows Server 2003
Windows Server 2019 LTSC
Windows Server 2008 R2
Windows Server 2016
Windows Server 2003 x64
Applies to
HD,1TB,722N,T06,3.5,S,CM
Model Number: ST1000NM004A-2MN130
Regulatory Model Number: STL010
Vendor PN: 2MN130-136
HD,2TB,722N,T06,3.5,S,CM
Model Number: ST2000NM012A-2MP130
Regulatory Model Number: STL010
Vendor PN: 2MP130-136
HD,4TB,722N,T06,3.5,S,CM
Model Number: ST4000NM016A-2HZ130
Regulatory Model Number: STL010
Vendor PN: 2HZ130-136
Installation instructions
1. Click the 'Download Now' link to download the file.
2. When the File Download window appears, click 'Save' to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
2. When the File Download window appears, click 'Save' to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.