SanDisk eMMC Firmware Update

Restart required

Driver Id : XKP1V

Importance : Recommended

Version : QS1.5D, A00 Latest version Recommended version Latest and Recommended version

Release Date : 28 Jan 2021

Download Type : Firmware

Category : Storage

This package contains the firmware for SanDisk eMMC firmware update for iNand 7550 32 GB, 64 GB, and 128 GB. Storage firmware is a microcode that is embedded on storage devices such as hard drives or solid state drives. The firmware manages the functionality of the devices.

Download Files

File Format: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.

File Name: SanDisk eMMC iNand 7550 (Ubuntu 18.04.4 LTS)_ZPE.exe

File size: 1.68 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: f8bad9d8086cd75f2d3222d6e404ef44

SHA1: 9ded500ebf56099235b6035af535d72cb0849a9b

SHA-256: 535450b9985354be60218a3250bd7cf0b52e6c96e623608f1c01ca07039e5877

Download .EXE

Important Information

- Ensure that you back up your data before performing this update. Do not interrupt your system during the firmware update process. Firmware update Installation time should take no longer than 1 minute.
- For IT admins, this update supports silent install. You can use management consoles or Dell applications such as Dell Command | Update, SupportAssist, or Dell Business Client Catalog with Config Manager for silent installation.

Installation instructions

Firmware upgrade through the Windows utility

Note: It is recommended to back up the data in the computer and close all open applications. It is also recommended that you connect the power cable to the computer and disconnect all external storage devices.

Download
1. Click Download File to download the file.
2. When the download is complete, unzip the file.
The file explorer open pointing to the directory that contains the downloaded file.

Upgrade Procedure
1. Close all applications and save your work before the firmware upgrade process.
2. Go to the location where you have downloaded the package and double-click the file to start the upgrade process.

SanDisk eMMC Firmware Update

Download Files

Fixes & Enhancements

Important Information

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to