Download Files
File Format: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
File Name: LTONT.exe
File size: 57.85 KB
To ensure the integrity of your download, please verify the checksum value.
MD5: cc55488ed45aca4e631f5e14f7707a2e
Fixes & Enhancements
This is the initial release of the driver
Supported Operating Systems
Installation instructions
After downloading, run the LTONT.EXE file from within Windows ONLY, and it
will create a floppy disk.
Driver Installation Instructions for Windows NT 4.0
Microsoft(r) Windows NT(r) 4.0:
1. Make sure that you are logged on to the host server
or workstation with Administrator privileges.
2. Insert the DELL PowerVault 110T LTO driver Support
disk (this disk) into the floppy disk drive on the
host server or workstation.
3. Click the Start button, point to Settings, then
click Control Panel.
4. Double-click the Tape Devices icon.
NOTE: If the host server or workstation already has
drivers installed, continue with step 5.
Otherwise, skip to step 7.
5. Click the Drivers tab.
6. Click the Add button.
7. Click the Have Disk button.
8. Type a:\, replacing a: with the drive letter for the
floppy disk drive into which you inserted the DELL
PowerVault 110T LTO driver floppy disk (this disk).
9. Click the Hewlett-Packard LTO Ultrium Tape Drive
entry and click the OK button.
10. When the New SCSI Tape Device Found dialog box
appears, click its OK button.
11. Type a:\, replacing a: with the drive letter for
the floppy disk drive into which you inserted the DELL
PowerVault 110T LTO driver floppy disk (this disk), and
click the Continue button.
12. Click the OK button in the Tape Devices dialog box.
13. Restart the host server or workstation.
14. After the server or workstation restarts, log on with
Administrator privileges, click the Start button, point
to Settings, click Control Panel, double-click the Tape
Devices icon, and make sure the DELL PowerVault 110T LTO
drive device driver is loaded. If the device driver is not
loaded, repeat the installation beginning at step 1.