Dell Networking N4000 Series, Firmware Version 6.3.2.7

Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
After upgrading Dell Networking PC8100 Series switches to firmware version 6.0.0.8 or later (6.3.2.7); the system model ID will show as "N4000" in CLI, Web UI and SNMP interfaces. Dell PowerConnect 8100 Series switches supports N4000 firmware versions 6.0.0.8 and later (6.3.2.7). Both Dell PowerConnect 8100 Series and Dell Networking N4000 Series switches shares the same firmware image version (for example., N4000v6.3.2.7.stk). Dell Networking PC8100 series switches can be stacked with Dell Networking N4000 series switches with the entire stack required to run 6.0.0.8 or later firmware (6.3.2.7). Dell Networking PC8100 series switches can support both 5.x and 6.x firmware versions, but Dell Networking N4000 can support only 6.0.0.8 and later firmware versions.

Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.3.2.7_Release_Notes".

Please follow software update instructions included in the zip file - "Upgrading Dell Networking N4000 Series Switches From Version 6.x.x.x to 6.3.2.7 Firmware.pdf".

Note: PowerConnect 8100 Series switches with B1 CPU Revision require firmware version 5.1.0.1 or later (6.3.2.7) and cannot be downgraded to earlier releases. If this unit is to be deployed as a member within a stack, the entire stack will be required to run 5.1.0.1 or later firmware (6.3.2.7). The improved CPU version XLP308H-B1 version is not compatible with firmware 5.0.x.x. The 'show version' CLI command in the 5.1.0.1 release has been improved to identify the CPU version of the switch.
Recommended

Check compatibility

Enter your Dell Service Tag or model

Want to look up your product? Enter a product identifier. Show me how

This driver is not compatible

This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.

Find more updates. Use SupportAssist to find all the latest driver updates for your device.

Fixes & Enhancements

Fixes:
CS2502701-N4000-6.3.1.13-N4k Stack shows null/zero MAC in ARP table with PFC config.
FIELD-2286-N4032-6.3.1.11-Switch hangs after neighbor-switch reloads manually.
FIELD-2193/CS2611600-N4k/6.3.1.8: stack unit crash with task 'tRpcsrv.01000'
FIELD-2310-N3048-6.3.2.4-Ubiquiti multicast frame is being looped on MLAG peer link.
FIELD-2319-N4064F/6.3.2.4/MLAG primary unit had abrupt reboot task name 'emWeb'
PSE036984,FIELD-2299-N1548-6.3.1.8-Fan speed oscillations causing more noise with no-change in temperature.
FIELD-2261,FIELD-2323, FIELD-2327-N2048P-6.3.2.3-MAC address not learnt in certain VLAN.

Enhancements:
None

Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.3.2.7_Release_Notes".
Read More

Version

6.3.2.7, A29

Release date

31 May 2017

Download Type

Firmware

Category

Network, Ethernet & Wireless

Importance

Recommended
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Available formats
File Format: Extracts files directly to local disk
File Name: N4000v6.3.2.7a29.zip
File Size: 32.18 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
MD5:
11af97fd4fcc748d7d8f9c2cf453b508
SHA1:
c2c8957c923ae51cafdfdbca648dffd246e539e8
SHA-256:
4bd6d5ca27e3d849a5d73e14dea271a611890561014050b4c8dba20fedf6363e
File Format: A text file containing customer friendly fixes and enhancements information
File Name: N4000ReadMev6.3.2.7a29.txt
File Size: 3.16 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format contains plain text which can be viewed with a standard text editor.
To ensure the integrity of your download, please verify the checksum value.
MD5:
f915643e488469e4db0fce2f07e73574
SHA1:
076424f9963953817f8e56a8e84f3475b212ec59
SHA-256:
dc11e6e6b3995fddfc295baba721bc1d287653425f85d5fdb3b96128ed138281

By downloading, you accept the terms of the Dell Software License Agreement.

Additional details

Show All | Hide All
Dell N4032
Dell N4032F
Dell N4064
Dell N4064F
(1) Download the zip file - N4000v6.3.2.7a29.zip
(2) Extract the image file "N4000v6.3.2.7.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell Networking N4000 Series Switches From Version 6.x.x.x to 6.3.2.7 Firmware.pdf" extracted from zip file.

Need help with network connection issues?

Find a solution in Dell's network troubleshooting guide

Drivers help and tutorials