Dell PERC H730/H730P/H830/FD33xS/FD33xD Mini/Adapter RAID Controllers firmware version 25.5.9.0001

Starting with firmware 25.5.7.0005, Raid Level Migration (RLM) or Capacity Expansion is blocked when a VD with the Maximum Target ID is present.
PERC H330 maximum target ID: 31
PERC H730P maximum target ID: 63
PERC H830 maximum target ID: 239

PERCCLI Install:
----------------

Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Click the Extract button and extract the Dell Update Package to a folder of your choice.
3. Download the PERCCLI utility for your respective operating system from support.dell.com (www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=3XDPP).
4. Install PERCCLI.
5. Open a command line prompt.
6. Run 'perccli show' and make note of the controller number for the controller you wish to update. If you only have one PERC in the system it will be controller 0.
7. Run 'perccli /cx download file=' where x=the index number for the controller you got in step 6.
8. Reboot the server as directed once the firmware flash completes.


Windows Update Package:
-----------------------

Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to
your hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the
new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window
before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.


Linux Update Package:
---------------------

Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to
your hard drive.

Installation
1. Read over the release information presented by executing the
"./FRMW_LX_RXXXXXX.BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before
proceeding.
3. Run the update by executing "./FRMW_LX_RXXXXXX.BIN" from the shell.
4. Follow the remaining prompts to perform the update.



GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN:
----------------------------------------------------------------------------

Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to
your hard drive.

Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file,
FRMW_LX_RXXXXXX.BIN