Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: 7350A08.exe
File size: 8.9 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 841e7103275324d3cb7bcf91e6624d94
SHA1: 99a8a91d77262e1c4214a56507c3000e9fa6c081
SHA-256: 02f62c1f97b66174abd857cc1b606e95e5345f8d6dfb55550d4a9c8b7c8bd1d0
Fixes & Enhancements
Fixes:
- Fixed disable "External USB Port Enable" function in BIOS Setup Menu cause Blue Screen on Windows 10.
Enhancement:
- Enhanced platform security performance.
- Improved battery discharge method to better handle battery discharge process when system is in the powered off state.
Important Information
User will not be able to downgrade the BIOS version below BIOS A07, after applying this update.
Supported Operating Systems
Installation instructions
BIOS Update Executable for Windows/DOS
Download
1. Download the file 7350A08.EXE.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if UEFI boot mode with Load Legacy Option disabled (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "General-Boot Sequence - Boot List Option".
3. Change "UEFI" to "Legacy" of Boot List Option.
4. Click "Apply","Exit" to save changes and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. DOS system will auto restart and update BIOS while system startup screen.
8. After BIOS update finished, system will auto reboot.
9. Go to BIOS Setup by pressing F2 and go to "General > Boot Sequence > Boot List Option".
10. Change "Legacy" to "UEFI" Boot Option.
11. Go to "Exit > Exit Save Changes" and reboot system.
--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
Note: 3.BIOS downgrade will be restricted after updating to the A08 version. Before updating to A08, please be aware that you will not be able to flash to a prior version once the update is installed.
Reboot will be required