Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: Latitude_E5x70_Precision_3510_1.15.4.exe
File size: 12.99 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 8ea5966aa287d25addff8d520c2fa308
SHA1: cd71d698ab98ddf63d95d60dbcc98f8cacbe4f09
SHA-256: 60250c44c48ab98430d3744d81e351c019a14d1669e053f6573b027fa6e9fb5a
Fixes & Enhancements
Fixes:
- Fixed sometimes boot loop issue when Trusted Execution is enabled in the BIOS setup.
- Fixed USB keyboard and mouse not working when Bitlocker enabled.
- Fixed system show blue screen after resume from sleep with HDD password set and AHCI SATA mode.
- Fixed Bitlocker can't be enabled on TPM 1.2 systems with Windows 7 OS.
Enhancements:
- Updated Intel Processor Micro code.
- Update Intel Trusted Execution Technology ACM.
Supported Operating Systems
Installation instructions
--------------------------------------------------------------------------------
BIOS Update Executable for Windows/DOS
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if UEFI boot mode with Load Legacy Option disabled (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "General-Boot Sequence - Boot List Option".
3. Change "UEFI" to "Legacy" of Boot List Option.
4. Click "Apply","Exit" to save changes and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. DOS system will auto restart and update BIOS while system startup screen.
8. After BIOS update finished, system will auto reboot.
9. Go to BIOS Setup by pressing F2 and go to "General > Boot Sequence > Boot List Option".
10. Change "Legacy" to "UEFI" Boot Option.
11. Go to "Exit > Exit Save Changes" and reboot system.
--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
Applies to
Dell Latitude E5270/E5470/E5570, Precision 3510