Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: 6430UA05.exe
File size: 8.26 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 59c1c78e57db3adc42ec7ac524031467
SHA1: 9405620ced1249e8caf6c5e898bd08a2f79871fb
SHA-256: 3d34a69a6189b09b7b537807ef296b4003ef7a1e21df1bfce544b020221f4559
Fixes & Enhancements
Fixes
-Not Applicable
Enhancements
- Enhanced POST logo functionality.
- Enhanced Secure boot functionality.
- Enhanced HDD password functionality.
- Improved system password functionality.
- Improved DDPA functionality.
- Improved USB functionality at Pre-boot environment.
- Supported DIMM isolation.
- Updated Intel Management Engine firmware to 8.1.30.1350.
Supported Operating Systems
Installation instructions
BIOS Update Executable for Windows/DOS
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select USB Storage Device and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if UEFI Boot Mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to General > Boot Sequence > Boot List Option
3. Change UEFI to Legacy of Boot List Option
4. Click Apply, Exit to save changes and reboot system.
5. Press F12, then Select USB Storage Device and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot .
8. Go to BIOS Setup by pressing F2 and go to General > Boot Sequence > Boot List Option
9. Change Legacy to UEFI Boot Option.
10. Click Apply, Exit to save changes and reboot system
--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
Reboot will be required