Intel E7500 Chipset, A00
Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.Intel E-7500 chipset INF file for PE 2600
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
This driver will clear the yellow warnings in the System Device Manager
with Windows 2000. The warnings are associated with the Intel E7500 chip
set.
Read Morewith Windows 2000. The warnings are associated with the Intel E7500 chip
set.
Version
A00, A00
Release date
04 Nov 2002
Download Type
Driver
Category
Chipset
Importance
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Available formats View Important Information
File Format: Extracts files directly to local disk
File Name: P64H2A00.exe
File Size: 24.61 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
This procedure is only for the Dell Power Edge 2600 systems.
Supported Operating Systems
Windows 2000
Installation instructions
PE 2600 INTEL E7500 CHIP SET DRIVER INSTALLATION INSTRUCTIONS FOR W2K
0. Print a copy of these instructions to use as a reference while
installing the driver.
1. Download the file P64H2A00.EXE to a temporary directory on your hard
drive. This file is a self-extracting executable.
2. Execute the downloaded file by double clicking it. This will allow you
to extract the two files archived in P64h2A00.EXE to C:\WINNT\TEMP. By
following the on-screen instructions, you may specify an alternate
directory when the file is executed.
3. Two files, p64h2.cat and p64h2.inf, will be extracted to the directory
that you specified in Step 2.
4. To install the new driver, first click on the Start Button.
5. Then go to "Settings" and click on "Control Panel".
6. Next, double click the "System" icon.
7. With the "System Properties" window now open, click on the "Hardware"
tab.
8. Under the "Hardware" tab, click on the button entitled "Device
Manager..." The "Device Manager" window will open.
9. In the "Device Manager" window, click on the '+' sign next to "System
devices" to expand the list of System devices.
9. In the "System devices" list, look for devices labeled as "Intel(R)
P64H2 PCI to PCI Bridge - 1460". The following steps will have to be
performed for each of the devices labeled as "Intel(R) P64H2 PCI to PCI
Bridge - 1460".
10. Double click on a device that is labeled as "Intel(R) P64H2 PCI to
PCI Bridge - 1460" to open its Properties window.
11. In the "Intel(R) P64H2 PCI to PCI Bridge - 1460 Properties" window,
click on the "Driver" tab.
12. Under the "Driver" tab, click on the "Update Driver..." button. This
will open the "Upgrade Device Driver Wizard" window.
13. In the "Upgrade Device Driver Wizard" window, click the "Next >"
button.
14. In the "Upgrade Device Driver Wizard" window, under "What do you want
the wizard to do?", select "Display a list of the known drivers for this
device so that I can choose a specific driver" and then click the "Next
>" button.
15. In the "Upgrade Device Driver Wizard" window, under "Select a Device
Driver", click the "Have Disk..." button. This will open the "Install
From Disk" window
16. In the "Install From Disk" window, click the "Browse..." button.
This will open the "Locate File" window.
17. In the "Locate File" window, under "Look in:", navigate to the
directory that you specified in Step 2 in order to locate the file
p64h2.inf. Once the correct directory path is specified, click on the
file p64h2.inf. This will cause "p64h2.inf" to appear in the "File
name:" field. Once this has occurred, click the "Open" button.
The "Locate File" window will close.
18. In the "Install From Disk" window, the "Copy manufacturer's files
from:" field will now contain the directory path that you specified in
Step 17. Be certain that it is the same directory path that you
specified in Step 2. If it is not, repeat Steps 16 and 17. If it is,
click the "OK" button.
19. In the "Update Device Driver Wizard" window, under "Models:",
click "Intel(R) P64H2 PCI to PCI Bridge - 1460" to highlight it. Then
click the "Next >" button.
20. The "Update Device Driver Window" will now report the following
message. "The wizard is ready to install the driver for the following
hardware device: Intel(R) P64H2 PCI to PCI Bridge - 1460". Click
the "Next >" button.
21. The "Update Device Driver Window" will now report the following
message. "Windows has finished installing the software for this device.
To close this wizard, click Finish." Click the "Finish" button.
22. In the "Intel(R) P64H2 PCI to PCI Bridge - 1460 Properties" window,
click the "Close" button.
23. Repeat Steps 10 through 22 for all "Intel(R) P64H2 PCI to PCI Bridge -
1460" devices listed under "System devices" in the Device Manager
window.
24. After the drivers have been installed for all
0. Print a copy of these instructions to use as a reference while
installing the driver.
1. Download the file P64H2A00.EXE to a temporary directory on your hard
drive. This file is a self-extracting executable.
2. Execute the downloaded file by double clicking it. This will allow you
to extract the two files archived in P64h2A00.EXE to C:\WINNT\TEMP. By
following the on-screen instructions, you may specify an alternate
directory when the file is executed.
3. Two files, p64h2.cat and p64h2.inf, will be extracted to the directory
that you specified in Step 2.
4. To install the new driver, first click on the Start Button.
5. Then go to "Settings" and click on "Control Panel".
6. Next, double click the "System" icon.
7. With the "System Properties" window now open, click on the "Hardware"
tab.
8. Under the "Hardware" tab, click on the button entitled "Device
Manager..." The "Device Manager" window will open.
9. In the "Device Manager" window, click on the '+' sign next to "System
devices" to expand the list of System devices.
9. In the "System devices" list, look for devices labeled as "Intel(R)
P64H2 PCI to PCI Bridge - 1460". The following steps will have to be
performed for each of the devices labeled as "Intel(R) P64H2 PCI to PCI
Bridge - 1460".
10. Double click on a device that is labeled as "Intel(R) P64H2 PCI to
PCI Bridge - 1460" to open its Properties window.
11. In the "Intel(R) P64H2 PCI to PCI Bridge - 1460 Properties" window,
click on the "Driver" tab.
12. Under the "Driver" tab, click on the "Update Driver..." button. This
will open the "Upgrade Device Driver Wizard" window.
13. In the "Upgrade Device Driver Wizard" window, click the "Next >"
button.
14. In the "Upgrade Device Driver Wizard" window, under "What do you want
the wizard to do?", select "Display a list of the known drivers for this
device so that I can choose a specific driver" and then click the "Next
>" button.
15. In the "Upgrade Device Driver Wizard" window, under "Select a Device
Driver", click the "Have Disk..." button. This will open the "Install
From Disk" window
16. In the "Install From Disk" window, click the "Browse..." button.
This will open the "Locate File" window.
17. In the "Locate File" window, under "Look in:", navigate to the
directory that you specified in Step 2 in order to locate the file
p64h2.inf. Once the correct directory path is specified, click on the
file p64h2.inf. This will cause "p64h2.inf" to appear in the "File
name:" field. Once this has occurred, click the "Open" button.
The "Locate File" window will close.
18. In the "Install From Disk" window, the "Copy manufacturer's files
from:" field will now contain the directory path that you specified in
Step 17. Be certain that it is the same directory path that you
specified in Step 2. If it is not, repeat Steps 16 and 17. If it is,
click the "OK" button.
19. In the "Update Device Driver Wizard" window, under "Models:",
click "Intel(R) P64H2 PCI to PCI Bridge - 1460" to highlight it. Then
click the "Next >" button.
20. The "Update Device Driver Window" will now report the following
message. "The wizard is ready to install the driver for the following
hardware device: Intel(R) P64H2 PCI to PCI Bridge - 1460". Click
the "Next >" button.
21. The "Update Device Driver Window" will now report the following
message. "Windows has finished installing the software for this device.
To close this wizard, click Finish." Click the "Finish" button.
22. In the "Intel(R) P64H2 PCI to PCI Bridge - 1460 Properties" window,
click the "Close" button.
23. Repeat Steps 10 through 22 for all "Intel(R) P64H2 PCI to PCI Bridge -
1460" devices listed under "System devices" in the Device Manager
window.
24. After the drivers have been installed for all
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.