Dell PowerConnect 6224, PowerConnect 6248, v.V1.0.4.3, A04

hi testing

Driver Id : R165738

Importance : Recommended

Version : V1.0.4.3, A04 Latest version Recommended version Latest and Recommended version

Release Date : 31 Aug 2007

Download Type : Firmware

Category : Network, Ethernet & Wireless

* This is Maintainence firmware release v1.0.4.3 for the Dell PowerConnect 62xx Ethernet switch.

* This firmware is transferable to the switch via a TFTP server.

Download Files

File Format: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.

File Name: PowerConnect_62XX_1043.zip

File size: 8.51 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 36c3427f4ff99428373fdea659ab40d6

Download .ZIP

File Format: This file format contains plain text which can be viewed with a standard text editor.

File Name: PC_62XX_v1043_ReadMe.txt

File size: 4.03 KB

To ensure the integrity of your download, please verify the checksum value.

MD5: a8385b44234425f7a07f16e69e705314

Download .TXT

Fixes & Enhancements

This is a mainataince Release which addresses the field issues and added on new feature basewd on customer request

- When the exported switch configuration is being downloaded to the switch via tftp server, Errors are reported during configuration validation
- When the VLAN1 IP address is changed using the CLI, the default-gateway disappears.
- In the WebUI for the 62xx, the “Time” column in the RMON Event Control screen is showing sysUpTime (seconds that the switch has been running). It should be showing the last time an event was generated. The CLI is working correctly
- If no SFPs are plugged in, attempting to run an optical transceiver diagnostic will restart the switch.
- If the switch is configured to use Radius on MS IAS for authentication, a Telnet or HHTP user can only gain level 1 access.
- It is not possible to delete a backup image while the switch is being used in a stacked configuration.
- Whenever trunk mode is configured, the following line appears in the config automatically. “switchport trunk allowed vlan remove 1”
- Added debug shell commands to improve serviceability.

New Feature added
- IGMP Snooping Querier

Installation instructions

Custom Instructions for PC_62XX_v1043_ReadMe.txt:

Download

1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
6. Review the readme file to complete installation.
Custom Instructions for PowerConnect_62XX_1043.zip:

Download

1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
6. Review the readme file to complete installation.

Dell PowerConnect 6224, PowerConnect 6248, v.V1.0.4.3, A04

Download Files

Fixes & Enhancements

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to