Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell OptiPlex 7090 System BIOS
Restart required Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This package contains the Dell system BIOS update. BIOS is a firmware package that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices.
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
- Fixed the issue where the Thunderbolt4 card in Device Manager is missing and then automatically gets detected.
- Fixed the issue where the system fails to PXE boot off the PCIe Network Interface Cards (NICs) through Wake-on-LAN. This issue occurs after the system resumes from Hibernate mode or shutdown.
- Fixed the issue where the system takes time to resume from Sleep mode. This issue occurs on systems with Intel Optane SSD or when Intel Optane SSD password is set.
- Fixed the issue where the system wakes up from the shutdown state through Wake-on-LAN when SMB Provision and Wake-on-LAN are disabled in the BIOS.
- Fixed the issue where the system cannot wake up from Hibernate mode or shutdown through power button. This issue occurs when a device is connected to the system Type-C port.
- Fixed the issue where Intel Display audio is not displayed in Device Manager on systems with BIOS version 1.1.19 and 11th generation Intel processors.
Read More- Fixed the issue where the system fails to PXE boot off the PCIe Network Interface Cards (NICs) through Wake-on-LAN. This issue occurs after the system resumes from Hibernate mode or shutdown.
- Fixed the issue where the system takes time to resume from Sleep mode. This issue occurs on systems with Intel Optane SSD or when Intel Optane SSD password is set.
- Fixed the issue where the system wakes up from the shutdown state through Wake-on-LAN when SMB Provision and Wake-on-LAN are disabled in the BIOS.
- Fixed the issue where the system cannot wake up from Hibernate mode or shutdown through power button. This issue occurs when a device is connected to the system Type-C port.
- Fixed the issue where Intel Display audio is not displayed in Device Manager on systems with BIOS version 1.1.19 and 11th generation Intel processors.
Version
1.1.25, 1.1.25
Release date
08 Jun 2021
Download Type
System BIOS
Category
BIOS
Importance
RecommendedDell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Available formats View Important Information
File Format: CPG BIOS Executable for Windows/DOS
File Name: OptiPlex_7090_1.1.25.exe
File Size: 40.35 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
To ensure the integrity of your download, please verify the checksum value.
MD5:
a5e3bbaa43cfafd88338f5c5bb36dec8
SHA1:
400bf14a7459d0783a8baf5eff230736bc74c83e
SHA-256:
1050d4d687dddb4983679fd1da74fef0e91f0706b7a6e045fe4fe51518411512
File Format: BIOS Recovery Image File
File Name: BIOS_IMG.rcv
File Size: 40.35 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of a BIOS Recovery image file. This file is used for the System BIOS Recovery process to recover a system from a corrupted BIOS.
To ensure the integrity of your download, please verify the checksum value.
MD5:
a5e3bbaa43cfafd88338f5c5bb36dec8
SHA1:
400bf14a7459d0783a8baf5eff230736bc74c83e
SHA-256:
1050d4d687dddb4983679fd1da74fef0e91f0706b7a6e045fe4fe51518411512
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
BIOS updates take no more than 5 minutes to be installed on your system. You can install the updates in the background while using the system.
Applies to
OptiPlex 7090 System BIOS
Installation instructions
Updating the BIOS from Windows
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from BIOS Boot Menu (independent of operating system)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Installation
1. Copy the downloaded file to a USB drive. You do not need a bootable USB drive.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click OK.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a Flash Progress bar at the Dell logo screen. The system restarts again when the Flash update is complete.
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from BIOS Boot Menu (independent of operating system)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Installation
1. Copy the downloaded file to a USB drive. You do not need a bootable USB drive.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click OK.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a Flash Progress bar at the Dell logo screen. The system restarts again when the Flash update is complete.
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting guideDrivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.