Download Files
File Format: This file format consists of a BIOS-executable file. To use it, download the file and copy it to a DOS-bootable USB flash drive, then boot the system to the USB flash drive and run the program.
File Name: Latitude_5X01_Precision_3541_1.3.2.exe
File size: 15.09 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 124344e89913519de405317789cdeaf2
SHA1: 86f9c9b5c499e19686c93a60bb699ac76003a48c
SHA-256: 3ee05bf78261be205c00eb933a60b7e7c1028325d118bf08438ae5a9da0873ff
Fixes & Enhancements
- Enhanced the stability of the system.
Important Information
Once the BIOS is upgraded, you cannot downgrade BIOS EXE/ Recovery (RCV) to the versions before 1.1.10.
Supported Operating Systems
Installation instructions
Updating the BIOS from Windows
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Download and Installation
1. Click Download File, to download the file.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file and double-click the file.
4. Click Yes to open the BIOS update utility.
5. Click Update to initiate the update process. A progress bar is displayed.
6. Click Restart to restart the system once the progress bar reaches 100%.
The update process initiates at the Dell logo and an update initiation message is displayed with a progress bar. After BIOS update finishes, system will auto reboot to take effect.
Updating the BIOS from the BIOS Boot Menu, independent of operating system
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Download and Installation
1. Click Download File, to download the file.
2. Copy the downloaded file to a USB flash device. It does not need to be bootable.
3. Insert the USB flash device into any USB port.
4. Power on the system.
5. At the DELL logo screen, press F12 to access the one-time boot menu.
6. Select BIOS Flash Update in the Other Options section.
7. Click the "..." button to browse the USB flash device to locate the downloaded file.
8. Select the file and click Ok.
9. Confirm the Existing System BIOS Information and the BIOS Update Information are as expected.
10. Click Begin Flash Update.
11. Reviewing the Warning message and click Yes to proceed with the update.
12. The system should restart and show a Flash Progress bar on the Dell logo screen as the BIOS update is being performed.
13. The system restarts once again when the Flash update is complete.
Applies to
Latitude 540X;Latitude 550X;Precision 354X