Dell BMC Firmware, v.1.23, A03

WARNING!!! DO NOT REMOVE THE DISKETTE WHILE FLASHING!!!
WARNING!!! UNDER WINDOWS NT/2000/2003 DO NOT HIT ANY KEY ON KEYBOARD WHILE FLASHING!!!
NOTE: In order to create this diskette, the .exe file must be downloaded to and executed on a system running Microsoft Windows.
WARNING!!! Do not use the Dell Update Package version of this update on systems running OpenIPMI drivers, IMB drivers, or Windows Server 2003 R2! If you must install this update on the afore-mentioned systems, use the DOS update utility.

---

Custom Instructions for PE1850BmcA03.exe:

Download

1. Click the Download Now link to download the file.
2. If the Export Compliance Disclaimer window appears, click the I agree link to accept the agreement.
3. When the File Download window appears, click Save to save the file to your hard drive.


Extract Files

1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.

Additional Instructions

MS-DOS Version
1. Boot the system requiring the update to DOS.
2. Insert the diskette created above or change to the directory on the
hard drive where the files were un-zipped.
3. At the DOS prompt, type "BMCFL16D". This will run BMCFL16D.EXE
4. Answer “Y” at the prompt to begin the upgrade.

Instructions for ESM_FRMW_WIN_R92430.EXE:

Download

1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation

1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.

---

Instructions for ESM_FRMW_LX_R92430.BIN:

Download

1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation

1. Read over the release information presented by executing the ./ESM_FRMW_LX_R92430.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ./ESM_FRMW_LX_R92430.BIN from the shell.
4. Follow the remaining prompts to perform the update.

---