Dell PowerConnect 5212, v.3.0.0.2, A02

Driver Id : R100997

Importance : Recommended

Version : 3.0.0.2, A02 Latest version Recommended version Latest and Recommended version

Release Date : 20 May 2005

Download Type : Firmware

Category : Network, Ethernet & Wireless

* This is the firmware release v3.0.0.2 for the Dell PowerConnect 5212 networking switch.

* This firmware is transferable to the switch via a TFTP server.

* Please read the notes in the zip file for further information.

Download Files

File Format: This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.

File Name: PC_5212_v3002_Firmware.zip

File size: 1.53 MB

Download .ZIP

File Format: This file format contains plain text which can be viewed with a standard text editor.

File Name: PC_5212_v3002_ReadMe.txt

File size: 4.05 KB

Download .TXT

Fixes & Enhancements

What’s new in Release v3.0.0.2

- IEEE 802.1x Port Authentication (new feature)

- SNMP looping Issue on Noval PortMgtTable Table

- The port state is on "Unauthenticated" but host still have the access to switch

- Nessus scan locks up the switch

- SNMP - Invalid v1 linkup & link down traps

- SNMPv1 - No linkup traps generated after a warm start

- Web UI doesn't refresh with updated information after "Applying Changes"

- Enhanced filtering capabilities

- Loss of access to the management when broadcast storm happens

- GBIC numbering

- TACACS/RADIUS IP's should be 0.0.0.0 by default

- IE 6 reports that secure WBI contains insecure items

- Syslog shows invalid date and time

- MAC Address Table inconsistency

- With a fiber LAG hard set to 1000full will return to default LAG of Auto-Negotiation

- Noval corrupt vlan ID 4294966296

- WBI Utilization chart values do not reflect utilization correctly

- Fiber ports do not work in forced mode

- ARP Corruption Issue

- Loosing connectivity when uplink port configured as a Trunk and pinging from the DUT.

- Flash log message confusion

- Memory Leak when using HTTP & SSH

Installation instructions

Custom Instructions for PC_5212_v3002_ReadMe.txt:

Download and view ReadMe document using a text editor.
The file contains a list of changes associated with this release.
Instructions for PC_5212_v3002_Firmware.zip

Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.

Dell PowerConnect 5212, v.3.0.0.2, A02

Download Files

Fixes & Enhancements

Compatible Systems

Supported Operating Systems

Installation instructions