Seagate Cheetah VI 10K 146LP U320 36GB 68Pin, Cheetah VI 10K 146LP U320 36GB 80Pin, Cheetah VI 10K 146LP U320 73GB 68Pin, Cheetah VI 10K 146LP U320 73GB 80Pin, Cheetah VI 10K 146LP U320 146GB 68Pin, Cheetah VI 10K 146LP U320 146GB 80Pin, v.DS09, A00

Custom Instructions for BR71432.exe:

Utility must be placed on a non-write protected diskette.

NOTE: In order to create this diskette, the file must be downloaded to and executed on a system running Microsoft Windows.

Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.

Diskette Creation
1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set.
2. Insert a blank diskette then click Continue.
3. After all the files have been copied to the last, click Finish.

Installation:
NOTE: BACKUP ALL DATA BEFORE RUNNING THIS PROGRAM. Do not remove power from the devices or disturb the devices in any way while the download is in progress. Dell, Inc is not Responsible for any data loss resulting from the use of this program

NOTE: Before proceeding with the update, refer to README.TXT file, section 3.0 "Using The Update Utility" for important information regarding the update process.

Upon booting up from Update diskette, the user is displayed a menu and prompted to select the type of SCSI or RAID controller whose SCSI HDD is connected to.

1. LSI 1020 for PE1600 .....................................Controller
2. LSI 1030 for PE2600 .....................................Controller
3. 7890, 7899, 2940U2W family ..............................Controller
4. PERC2, PERC2/Si, PERC3/Si, PERC3/Di......................Controller
5. PERC3/SC PERC3/DC, PERC3/DCL, PERC3/QC...................Controller
6. PERC4/Di, PERC4/SC, PERC4/DC.............................Controller

If PERC3/xx, PERC4/xx is selected, the user is prompted to select
the channel number the drives are connected to:

1)Update Drives connected to Channel 0 of PERC3 ?
2)Update Drives connected to Channel 1 of PERC3 ?
3)Update Drives connected to Channel 2 of PERC3 ?
4)Update Drives connected to Channel 3 of PERC3 ?

Once the controller selection has been made, utility will prompt the user to continue the update. Follow the prompts to completely update all target Seagate U320 10K devices found.

Once the update is complete Remove the diskette and reboot the system.