Security patches for Windows 10 IoT Enterprise (build 1607)-December 2018
Restart required Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This package is supported on Wyse 5060 thin client, Latitude 3480 mobile thin client, Latitude 5280 mobile thin client, Wyse 5070 thin client with Celeron processor, Wyse 5070 thin client with Pentium processor, and Wyse 5070 Extended thin client with Pentium processor.
This release supports the following KBs:
• DotNetCompilation_WIE10.exe
• OSComponentCleanup.msi
• AMD64-all-windows10.0-kb4471331-x64.msu
• AMD64-all-windows10.0-kb4483229-x64.msu
1) DotNetCompilation_WIE10.exe
• You must push the DotNetCompilation_WIE10 package after pushing .MSU Security Patches using WDM/WMS. This is required to compile DotNet KB files.
• Specify command parameter as --silent when you deploy the package using Wyse Management Suite, Wyse Device Manager, and Microsoft System Centre Configuration Manager.
For OSComponentCleanup.msi specify parameter as /qn when you deploy the package using Wyse Management Suite, Wyse Device Manager, and Microsoft System Centre Configuration Manager.
Note: OSComponentCleanup.msi add-on package cleans the superseded OS Components which are accumulated during installation of monthly cumulative security updates released by Microsoft.
This command execution provides additional free space in the disk and is useful to optimize the disk space in the Windows 10 IoT Enterprise based thin clients with 32 GB or higher disk configuration.
Prerequistes KB for December month:
Prerequiste SSU before deploying Cumulative KB:
https://support.microsoft.com/en-in/help/4465659
Microsoft recommends that you install the latest servicing stack update (SSU) for your operating system before installing the latest cumulative update (LCU). SSUs improve the reliability of the update process to mitigate potential issues while installing the LCU. For more information, see Servicing stack updates.
If you are using Windows Update, will be offered to you automatically.
This release supports the following KBs:
• DotNetCompilation_WIE10.exe
• OSComponentCleanup.msi
• AMD64-all-windows10.0-kb4471331-x64.msu
• AMD64-all-windows10.0-kb4483229-x64.msu
1) DotNetCompilation_WIE10.exe
• You must push the DotNetCompilation_WIE10 package after pushing .MSU Security Patches using WDM/WMS. This is required to compile DotNet KB files.
• Specify command parameter as --silent when you deploy the package using Wyse Management Suite, Wyse Device Manager, and Microsoft System Centre Configuration Manager.
For OSComponentCleanup.msi specify parameter as /qn when you deploy the package using Wyse Management Suite, Wyse Device Manager, and Microsoft System Centre Configuration Manager.
Note: OSComponentCleanup.msi add-on package cleans the superseded OS Components which are accumulated during installation of monthly cumulative security updates released by Microsoft.
This command execution provides additional free space in the disk and is useful to optimize the disk space in the Windows 10 IoT Enterprise based thin clients with 32 GB or higher disk configuration.
Prerequistes KB for December month:
Prerequiste SSU before deploying Cumulative KB:
https://support.microsoft.com/en-in/help/4465659
Microsoft recommends that you install the latest servicing stack update (SSU) for your operating system before installing the latest cumulative update (LCU). SSUs improve the reliability of the update process to mitigate potential issues while installing the LCU. For more information, see Servicing stack updates.
If you are using Windows Update, will be offered to you automatically.
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Microsoft Critical Security updates to address vulnerabilities and fixes.
Read MoreVersion
NA
Release date
08 Jan 2019
Download Type
Patch/Upgrade
Category
Patches And Fixes
Importance
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Available formats View Important Information
File Format: Firmware Images
File Name: WIE10_1607_SecurityPatches_December2018.zip
File Size: 1.38 GB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
To ensure the integrity of your download, please verify the checksum value.
MD5:
166a4e629912692edba3deea2fb190dd
SHA1:
9b5ee2bca7dcf65e2f1b78a584e5cd5411a04075
SHA-256:
e477a659f1d0ccd7840f172af6b0e3ae73782ccb2ba96e62a3bd176d8f6223d9
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
1)Do not power off your system during Windows Update or QFE installation.
2)Updating latest WDA on client side is recommended before updating Security Updates using WDM and WMS.
2)Updating latest WDA on client side is recommended before updating Security Updates using WDM and WMS.
Supported Operating Systems
Windows 10, 64-bit
Installation instructions
Installation of this package can be possible through WDM by following the below procedure:
1. Download and open the Package Registration Utility dialog box.
2. Click the EXE tile displayed on the WDM Package Registration Utility dialog box.
3. Browse the exe, msi, msu, or bat files only or package to upload. The following details of the selected package is displayed.
-Name
-Description
-Operating System
-Category
-Image Size
-Install Path
-Command Parameters
4. From the Operating System drop-down list, select the operating system.
5. Enter a valid thin client path to install the package in the provided field.
6. Enter the command parameters in the provided field.
7. Click Upload.
8. Schedule the package to the target client
Lock screen is disabled when you push the package using WDM.
Instructions to Register and deploy a package using Wyse Management Suite.
1. Register the device to WMS server and add to the respective add-on group.
2. Download the .msu file
3. Copy. msu file to the WMS server Repository.
4. Log in to Wyse Management Suite.
5. Go to Portal Administration and select File Repository.
6. Click Sync Files.
7. Go to Apps & Data > App Inventory > Thin Client, and verify the files listed under the Thin Client.
8. Go to Apps & Data > App Policies > Thin Client > Add Policy.
9. Configure the options
10. Click Save.
11. Click Yes to schedule the job immediately.
12. Go to App Policy, and update the job Description.
13. Click Run>Immediately
14. Click Preview and then click Schedule.
15. Go to Jobs and verify the job status.
Lock screen will be enabled when pushed from WMS.
1. Download and open the Package Registration Utility dialog box.
2. Click the EXE tile displayed on the WDM Package Registration Utility dialog box.
3. Browse the exe, msi, msu, or bat files only or package to upload. The following details of the selected package is displayed.
-Name
-Description
-Operating System
-Category
-Image Size
-Install Path
-Command Parameters
4. From the Operating System drop-down list, select the operating system.
5. Enter a valid thin client path to install the package in the provided field.
6. Enter the command parameters in the provided field.
7. Click Upload.
8. Schedule the package to the target client
Lock screen is disabled when you push the package using WDM.
Instructions to Register and deploy a package using Wyse Management Suite.
1. Register the device to WMS server and add to the respective add-on group.
2. Download the .msu file
3. Copy. msu file to the WMS server Repository.
4. Log in to Wyse Management Suite.
5. Go to Portal Administration and select File Repository.
6. Click Sync Files.
7. Go to Apps & Data > App Inventory > Thin Client, and verify the files listed under the Thin Client.
8. Go to Apps & Data > App Policies > Thin Client > Add Policy.
9. Configure the options
10. Click Save.
11. Click Yes to schedule the job immediately.
12. Go to App Policy, and update the job Description.
13. Click Run>Immediately
14. Click Preview and then click Schedule.
15. Go to Jobs and verify the job status.
Lock screen will be enabled when pushed from WMS.
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.