Download Files
File Name: A36_ME484_JBOD_HDD_Firmware_with_ReadMe.zip
File size: 101.43 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: d7dec237b807d4a358616efff59f20f7
SHA1: 085edb2f42a92582cb4f9bbf54f94cb4a7a42115
SHA-256: 8a0789ded7862d9e649d920de69516b78a526bbf82fb2ad61791214b32115b15
Fixes & Enhancements
Fixes:
DL1800MM0159
DL2400MM0159
BL2400MM0159
ST8000NM024B
Enhancements:
DL4000NM019B
MZILG3T2HCLSAD9
Important Information
This HDD/SSD firmware update package contains the latest HDD/SSD firmware images supported in the Dell EMC PowerVault ME Storage Enclosure.
Supported Operating Systems
Red Hat® Enterprise Linux 7
Red Hat® Enterprise Linux 8
SUSE Linux ES 12
SuSE Linux ES 15
Windows Server 2012 R2
Windows Server 2019 LTSC
Windows Server 2022 LTSC
Windows Server 2016
Installation instructions
During the next scheduled maintenance window, please update the drive firmware to the latest level.
To update Physical Disk firmware through a ME40xx/ME50xx enclosure using Dell ME PowerVault management application, please follow the steps below:
1) Obtain the appropriate firmware file and download it to your computer or network.
2) It is recommended to stop IO to the storage system. During the update all volumes will be temporarily inaccessible to hosts. If I/O is not stopped, mapped hosts will report I/O errors. Volume access is restored after the update completes.
3) Update disk firmware as per direction in the Administrator's Guide. It typically takes several minutes for the firmware to load. Wait for a message that the update has completed.
CAUTION: Do not power cycle enclosures or restart a controller during the firmware update. If the update is interrupted or there is a power failure, the disk drive might become inoperative. If this occurs, contact technical support.
4) Verify that each disk drive has the new firmware revision.
Applies to
PowerVault ME Storage Array