Download Files
File Format: Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
File Name: SCSI_DRVR_WIN_R110592.EXE
File size: 1.19 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: CA7122A2745835A958B168008345FC6E
File Format: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
File Name: 39320A-W2K3x64-A01-flp.exe
File size: 891.11 KB
File Format: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
File Name: 39320A-W2K3x64-A01-HD.exe
File size: 228.9 KB
Fixes & Enhancements
Repackage of Initial Release to pick up DUP support
Supported Operating Systems
Installation instructions
Instructions for 39320A-W2K3x64-A01-flp.exe
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Diskette Creation
1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set.
2. Insert a blank diskette then click Continue.
3. When prompted, repeat step 2 until you reach the end of the diskette set. Label each diskette with a disk number starting from 1.
4. After all the files have been copied to the last diskette, click Finish.
New Installation:
1. Unzip files to a blank floppy disk --
2. Start installing OS.
3. Press F6 when a message appears requesting you to press F6 if you need to install third party SCSI or RAID drivers.
4. When the Windows Setup window is displayed, Press S to specify additional device(s).
5. Insert the driver diskette and press ENTER.
6. The Windows Setup screen displays a message indicating that Setup will load support for the requested storage devices.
7. If there are any additional devices to be installed, specify them now by pressing S.
8. When all devices are specified, continue to the next step by pressing ENTER.
Update Installation:
1. Open "Device Manager"
2. Open "SCSI and RAID Contollers"
3. Select "Adaptec 39320A SCSI Controller"
4. Select the "Driver" tab
5. Click on "Update Driver"
6. Choose "Install from a list of specific location (Advanced)"
7. Check "Include this location in the search:"
8. Enter the path to the floppy you created and hit "Next"
9. Hit next again and then Finish
10. If prompted to reboot, do not reboot yet.
11. Repeat steps 3 through 9 for the second channel of the controller.
12. If prompted to reboot to complete update, do so.
Instructions for 39320A-W2K3x64-A01-HD.exe
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Update Installation:
1. Open "Device Manager"
2. Open "SCSI and RAID Contollers"
3. Select "Adaptec 39320A SCSI Controller"
4. Select the "Driver" tab
5. Click on "Update Driver"
6. Choose "Install from a list of specific location (Advanced)"
7. Check "Include this location in the search:"
8. Enter the locations where you saved extracted files and hit "Next"
9. Hit next again and then Finish
10. If prompted to reboot, do not reboot yet.
11. Repeat steps 3 through 9 for the second channel of the controller.
12. If prompted to reboot to complete update, do so.
Dell Update Package Instructions for SCSI_DRVR_WIN_R110592.EXE:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Applies to
39320A Leadfree Controller