Dell Networking N2000 Series, Firmware Version V6.3.0.9,A16

Restart required

Driver Id : 3F2G7

Importance : Recommended

Version : 6.3.0.9, A16 Latest version Recommended version Latest and Recommended version

Release Date : 16 May 2016

Download Type : Firmware

Category : Network, Ethernet & Wireless

Both Dell Networking N2000 and N3000 Series switches share the same firmware image file (N3000_N2000v6.3.0.9.stk). If your N2000 series switch has an earlier version of firmware (6.0.0.7 or 6.0.0.8 or 6.0.1.3), upgrade your switch to the latest version of firmware 6.3.0.9 as it contains multiple bug fixes.

Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.3.0.9_Release_Notes".

Please follow firmware upgrade instructions included in the zip file - "Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.3.0.9 Firmware"

Download Files

File Format: This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.

File Name: N2000v6.3.0.9a16.zip

File size: 29.28 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: e46d513d712c2ddda0ce9c370895d2df

SHA1: f060737d92a750a917f705844741b65f5fdeff77

SHA-256: 441fdbf1ac0d77ffdbdac4a4dacd2373f5e5d59898850bb5b011d600bb4abcf9

Download .ZIP

File Format: This file format contains plain text which can be viewed with a standard text editor.

File Name: N2000ReadMev6.3.0.9a16.txt

File size: 3.17 KB

To ensure the integrity of your download, please verify the checksum value.

MD5: aa257ecbce65e88ddeba8f2d1a556fbb

SHA1: b404daea5596934d9e979813abcb6ed4695b4ac9

SHA-256: 03d2bb1f724622bbaf7feea63fd7812c84eb06a0bfb96e81eb38ec1174d05f0c

Download .TXT

Fixes & Enhancements

New Features & Enhancements:
None

Fixes:
Case-ID Summary
1039629 N2048P/6.2.7.2-N2048P with 6.2.7.2 has experiened a spontaneous reboot
1048238 6.3.0.6-N2000 Switch is non-responsive to management access (SSH/Console)
1047819 6.3.0.6-PVST logs (STP TCNs and STP state change) not getting displayed after upgrade to 6.3
1037327 6.3.0.3-UTEP-Port-security-Last violation MAC address is not listed when port shutdown
1037325 6.3.0.3-UTEP-"show port-security all" CLI command output is misleading
1039920 N2048/6.2.7.4/N2048 dot1x MAB Periodic Re-Auth Failures
1047200 Update Hiveagent to version 2.62
1050364 Re-enable starting of HiveAgent on bootup
1050369 "port-security violation shutdown" command is not retained after save and reload

Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.3.0.9_Release_Notes"

Important Information

After upgrading to 6.3.0.9, the switch interfaces may go to D-Down state instead of STP BLK state when loop detected in the network. So we recommend to disable "loop-protection" feature globally and under all switch interfaces using the command "no keepalive" and save configuration. Also configure err-disable recovery feature by using the commands "err-disable recovery cause all" and "err-disable recovery interval 30" globally to recover the ports from D-Down state. If desired user can disable the err-disable recovery feature after ports are recovered from D-Down state by using the command "no err-disable recovery cause all"

Dell Networking N2000 Series, Firmware Version V6.3.0.9,A16

Download Files

Fixes & Enhancements

Important Information

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to