SK Hynix SC210 Solid State Drive Firmware Update

- It is recommended to back up all important data on the SSD before performing this firmware update.
- Following the provided instructions correctly should result in no data loss.
- Interrupting the firmware update process may result in data loss or system malfunction.
- This firmware update is performed at the user's own risk.

Download

1. Click Download File and follow the remaining prompts to download the file.
2. When the File Download window appears, click Run to unzip the download package into your hard drive.
3. The file explorer opens pointing to the directory containing the download package. Take note of the path.

------------------------------------------------------------------------------------------

ATTENTION
1. Backup the SSD.
2. Switch to AC Power

Firmware upgrade through the Windows utility

Procedure
1. Go to the directory containing the download package as noted above.
2. Run the firmware update utility with administrator privilege (right-click on the executable, then select "Run as administrator").
3. Follow the on-screen instructions.
4. Select the target SSD for firmware upgrade.
5. Click on "FW Update" button.
6. Follow the on-screen instructions.
7. DO NOT interrupt the firmware update. A dialog box appears when the firmware update is completed.
8. Reboot your system.

------------------------------------------------------------------------------------------

Firmware upgrade using the bootable image

1. An ISO image is provided in the download package. Use that image to create a bootable USB thumb drive. You may want to consider using UNetBootin
2. Boot the system from the USB thumb drive created in Step 1.
3.Your PC boots up with Linux booting screen and it displays SSDs that connected to your PC.
4. The FW update tool seeks SK Hynix SC210 SSD. If the tool find a SK Hynix SC210, it beings the update automatically, if not it displays an error message.
5. After successful FW update, PC shuts down after about 10 seconds.

1. Prepare a USB thumb drive
(1) USB storage and ISO image Writer(like UNetBootin) are needed for updating SSD FW with this package.
(2) Run unetbootin-windows-608.exe
(3) Check 'DiskImage' button and select path to ISO file using the ' ... ' option button.
(4) If USB Drive is ready, then UNetbooin shows the driver letter.
(5) Select OK to copy ISO bootable image to USB thumb drive
(6) Once installation is completed, follow the next steps on UNetbootin Window.



*Installation Instructions:
For the detail usage of this package, refer to the attached Update Tool Manual.