Dell Networking N4000 Series, Firmware Version 6.5.2.5

Restart required Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
Both Dell Networking N4000 Series and PC8100 Series Switches shares the same firmware image version (for example., N4000v6.5.2.5.stk). Dell Networking N4000 series switches can be stacked with Dell Networking PC8100 series switches with the entire stack required to run 6.0.0.8 or later firmware (6.5.2.5. Dell Networking PC8100 series switches can support both 5.x and 6.x firmware versions, but Dell Networking N4000 can support only 6.0.0.8 and later firmware versions.

Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell_EMC_Networking_6.5.2.5_Release_Notes(N1500_N2000_N3000_N3048EP-ON_N4000_PC8100).pdf".

Please follow software update instructions included in the zip file - "Upgrading Dell EMC Networking N4000 Series Switches From Version 6.x.x.x to 6.5.2.5.pdf".
Recommended

Check compatibility

Enter your Dell Service Tag or model

Want to look up your product? Enter a product identifier. Show me how

This driver is not compatible

This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.

Find more updates. Use SupportAssist to find all the latest driver updates for your device.

Fixes & Enhancements

Fixes:
[CS3889030, FIELD-2547]: Information about auto corrected parity errors

Enhancements
1) Introducing Dynamic ACLs support for RADIUS clients.
2) Added support for Diffserv policies and ACLs active on same interface/direction.
3) Added support for LLDP group addresses
4) Added support for RADIUS accounting messages to include Framed IPv4/IPv6 addresses.
5) Added CLI commands to configure delay in sending RADIUS accounting start messages
6) Added CLI commands to control of inclusion/exclusion of the attributes
7) Added support for LLDP messages to include and transmits port PVID by default
Read More

Version

6.5.2.5, A39

Release date

22 Aug 2018

Download Type

Operating Systems

Category

Network, Ethernet & Wireless

Importance

Optional
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Available formats View Important Information
File Format: Extracts files directly to local disk
File Name: N4000v6.5.2.5.A39.zip
File Size: 35.15 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
MD5:
313b386b7d23d1f4548b0a4a51317ccb
SHA1:
de0f7c6fddc5e60fa1b085d84c28f47f6ac84519
SHA-256:
748ad8ba5528f89b7f3c5410bb374999ce7f1338c1960979560a76e25d2e9760
File Format: A text file containing customer friendly fixes and enhancements information
File Name: N4000ReadMev6.5.2.5.A39.txt
File Size: 3.21 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format contains plain text which can be viewed with a standard text editor.
To ensure the integrity of your download, please verify the checksum value.
MD5:
dfd24a8a2c9664a64c05b3cda01ec210
SHA1:
66a5e46834d42f4823c0b535c65e07b4c744336c
SHA-256:
05aec8e77f2f9b29cefef1203c8fe59f4cced192786939f75188d4ea69b21550

By downloading, you accept the terms of the Dell Software License Agreement.

Additional details

Show All | Hide All
Fixes:
[CS3889030, FIELD-2547]: Information about auto corrected parity errors

Enhancements
1) Introducing Dynamic ACLs support for RADIUS clients.
2) Added support for Diffserv policies and ACLs active on same interface/direction.
3) Added support for LLDP group addresses
4) Added support for RADIUS accounting messages to include Framed IPv4/IPv6 addresses.
5) Added CLI commands to configure delay in sending RADIUS accounting start messages
6) Added CLI commands to control of inclusion/exclusion of the attributes
7) Added support for LLDP messages to include and transmits port PVID by default.
Dell N4032
Dell N4032F
Dell N4064
Dell N4064F
(1) Download the zip file - N4000v6.5.2.5.A39.zip
(2) Extract the image file "N4000v6.5.2.5.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell EMC Networking N4000 Series Switches From Version 6.x.x.x to 6.5.2.5 Firmware.pdf" extracted from zip file.

Need help with network connection issues?

Find a solution in Dell's network troubleshooting guide

Drivers help and tutorials