Dell Precision 7510 and 7710 System BIOS

Restart required

Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

Driver Id : H92CG

Importance : Critical

Version : 1.18.5, 1.18.5 Latest version Recommended version Latest and Recommended version

Release Date : 16 Oct 2019

Download Type : System BIOS

Category : BIOS

This package contains the Dell system BIOS update. BIOS is a firmware that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Intel security advisories INTEL-SA-00213 and INTEL-SA-00233. The security advisory is a statement when a product is impacted by a security vulnerability and a remedy is available.

Download Files

File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.

File Name: Precision_7x10_1.18.5.exe

File size: 9.59 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 6c0438937b2df4ac51fee1c6c3710e7d

SHA1: e0513bd2e720a44defaa0bc0b907bf2b4f62e6c8

SHA-256: b1b8725e2e90f6a6e6bdeb6fce1d96209d55ff4116caa58c891d49e69820c263

Download .EXE

Fixes & Enhancements

- Firmware updates to address security advisory INTEL-SA-00213 (CVE-2019-0086, CVE-2019-0091, CVE-2019-0092, CVE-2019-0093, CVE-2019-0094 and CVE-2019-0096)
- Firmware updates to address security advisories INTEL-SA-00233(CVE-2018-12126, CVE-2018-12127, CVE-2018-12130 and CVE-2019-11091)
- Fixed the issue where the TPM setting may be unexpectedly enabled after loading the Custom User Settings in BIOS.
- Fixed the issue where the Thunderbolt hard disk cannot be detected after setting Thunderbolt security level as No Security in BIOS setup menu.
- Fixed the issue where the system boots to USB device directly, bypassing the password stage when an admin password is set.
- Removed the Pre-Boot Intel RST Manager Optimized Defaults option.

Installation instructions

Updating the BIOS from Windows

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.

Download and Installation
1. Click Download File, to download the file.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file and double-click the file.
4. Click Yes to open the BIOS update utility.
5. Click Update to initiate the update process. A progress bar is displayed.
6. Click Restart to restart the system once the progress bar reaches 100%.
The update process initiates at the Dell logo and an update initiation message is displayed with a progress bar. After BIOS update finishes, system will auto reboot to take effect.

Updating the BIOS from the BIOS Boot Menu, independent of operating system

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.

Download and Installation
1. Click Download File, to download the file.
2. Copy the downloaded file to a USB flash device. It does not need to be bootable.
3. Insert the USB flash device into any USB port.
4. Power on the system.
5. At the DELL logo screen, press F12 to access the one-time boot menu.
6. Select BIOS Flash Update in the Other Options section.
7. Click the "..." button to browse the USB flash device to locate the downloaded file.
8. Select the file and click Ok.
9. Confirm the Existing System BIOS Information and the BIOS Update Information are as expected.
10. Click Begin Flash Update.
11. Reviewing the Warning message and click Yes to proceed with the update.
12. The system should restat and show a Flash Progress bar on the Dell logo screen as the BIOS update is being performed.
13. The system restarts once again when the Flash update is complete.

Dell Precision 7510 and 7710 System BIOS

Download Files

Fixes & Enhancements

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to