RAC FIRMWARE VERSION 2.51:
* Corrected an issue of no “Back” button on the remote access Web-based interface “Remote Floppy Boot” page. A “Back” button was added.
* Corrected an issue in which an incorrect error message was output by the “racadm getsysinfo” command.
* Corrected false failures in the lower noncritical threshold range on 12-V sensors on PowerEdge 1650 systems.
* Added Java Virtual Machine (JVM) version checking.
* Changed CPU temperature thresholds on PowerEdge 650 systems.
* Corrected “no POST/no Video” issue by adding support for new temperature sensors on PowerEdge 2650 systems.
* Corrected a firmware timing issue that caused system administrator services to fail to start.
* Corrected an issue in which Console Redirection did not work when using Netscape Navigator 7.0.2 on the Windows 2000 operating system.
* Corrected an issue so that the appropriate message is displayed when an incorrect version of Sun JVM is installed. The following correct message is now displayed to the user in the out-of-band GUI:
NOTE: The RAC remote access interface requires the Sun JVM version 1.4.1 or
later. No JVM is installed in your browser. Please consult the RAC user
documentation for more information regarding the installation of a supported
JVM.
* Corrected an issue in which JavaScript errors are seen frequently on the RAC remote access interface “Properties” page.
* Corrected an issue that caused a JavaScript error to occur when the "Apply" button was clicked when configuring the Remote Floppy Boot settings in the RAC remote access interface.
RAC SOFTWARE VERSION 2.5:
* Corrected issue in which the Server Administrator CLI did not allow you to set the country code for a RAC modem. The “Country Code” field has been added.
* Corrected an issue in which the RAC remote access interface did not accept the "#" character in the remote floppy boot folder name. The folder name now accepts the "#" character.
* Corrected an issue in the RAC remote access interface in which the “&” character displayed as “&” when used to set the firmware update path for the TFTP server.
* Corrected an issue in which you were unable to use the input field or "Browse" button to upload a security certificate in Mozilla 1.2.1.
* Corrected an issue in which the Server Administrator CLI output an incorrect error message when creating a “dialinuser” with a username longer than 15 characters.
* Corrected an issue in which the RAC graceful server actions (shutdown and restart) did not function in Red Hat Linux 9 with Dell OpenManage(TM) version 3.4.
* Corrected an issue in which the “Upload Certificate” feature on the “Security” tab in the ERA/O controller may result in the following error when running NetWare 6.0: "Error! File does not exist in the path specified.” If the signed certificate file exists in the path specified, it can now be uploaded. If the file does not exist in the path, an error message displays.
* Corrected an issue found when viewing the details of the RAC SSL server certificate in Server Administrator or the CLI, in which a RAC SSL server certificate is falsely identified as a Certificate Authority (CA) certificate. This correction fixed the following two issues: “View Server Certificate” links you to the wrong type of certificate; and in the OMSA CLI, the “omreport rac viewcertificate type” command output the wrong value for "type".
* Corrected an issue in the Server Administrator UI in which setting "Severity Configuration" on SNMP traps caused JavaScript errors.
* Corrected an issue that caused an error stating that the page could not be displayed when uploading a RAC SSL certificate in Server Administrator using Internet Explorer on systems running Windows Server 2003.
* Corrected an issue in which the Server Administrator “RAC Users” page allowed only 8-character passwords in th