Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: Precision_7x10_01.06.06.exe
File size: 9.06 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 958d3cd61b9b0c32bb6553685ccc4bbd
SHA1: ae36264ecd387a5f3fd16ef8db0db79524606008
SHA-256: 147fd40ad9a33d1ad2742067a9c26b5eadc5c256bc2d0687cc1acdffd8ca0ef1
Fixes & Enhancements
Fixes:
- Resolved Intel soft Guard Extension driver install issue.
- Resolved boot time problem when Hyperthreading is disabled.
- Resolved Dell Thunderbolt Dock issues.
Enhancements:
- Support Win10 Enterprise.
- Updated TI Power Delivery firmware.
- Update Realtek USB LAN firmware.
- Updated Embedded Controller firmware.
- Update Intel Processor Micro code.
- Added embedded LAN MAC address display item in BIOS setup menu.
- Added Attempt legacy boot item in BIOS setup menu.
- Removed Data wipe support when NVMe SSD attached.
- Updated suspend/resume protections.
Important Information
Important:
- Not allowed to downgrade the BIOS prior to 01.06.06.
Supported Operating Systems
Installation instructions
BIOS Update Executable for Windows/DOS
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if UEFI boot mode with Load Legacy Option disabled (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "General-Boot Sequence - Boot List Option".
3. Change "UEFI" to "Legacy" of Boot List Option.
4. Click "Apply","Exit" to save changes and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. DOS system will auto restart and update BIOS while system startup screen.
8. After BIOS update finished, system will auto reboot.
9. Go to BIOS Setup by pressing F2 and go to "General > Boot Sequence > Boot List Option".
10. Change "Legacy" to "UEFI" Boot Option.
11. Go to "Exit > Exit Save Changes" and reboot system.
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLockerencryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
Reboot will be required
Applies to
Precision 7510 system BIOS
Precision 7710 system BIOS