Intel SSD SATA SSDSC2BA100G3T, SSDSC2BA200G3T, SSDSC2BA400G3T and SSDSC2BA800G3T firmware version DL05

Driver Id : 48JFX

Importance : Recommended

Version : DL05, A00 Latest version Recommended version Latest and Recommended version

Release Date : 31 Oct 2013

Download Type : Firmware

Category : Storage

This release contains firmware version DL05 for Intel SSD (SSD 2.5 SATA) 100GB, 200GB, 400GB and 800GB Hard Drives. Dell. Vendor model numbers INTEL SSDSC2BA100G3T, INTEL SSDSC2BA200G3T, INTEL SSDSC2BA400G3T and INTEL SSDSC2BA800G3T.

Download Files

File Format: Dell Update Packages in native Microsoft Windows 64-bit format do not require that Microsoft WOW64 be installed on the Microsoft Windows Server.

File Name: Serial-ATA_Firmware_48JFX_WN64_DL05_X03.EXE

File size: 17.21 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 0d3e16a8018e0da081cdd91e9bfcca06

SHA1: 26a9b1789edcadf38a7f33ced167d83a282d9060

SHA-256: c524c199f95c9bf2a6397c4af392eff9c4e42bb5c94a5fd334f95be3710087e1

Download .EXE

File Format: The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.

File Name: Serial-ATA_Firmware_48JFX_LN_DL05_X03.BIN.sign

File size: 189 Bytes

To ensure the integrity of your download, please verify the checksum value.

MD5: 0fcf50e5f2527df800ca8f7dd1422e39

SHA1: f084e88588dc6fd822d407552aef2a3573110678

SHA-256: 2f2285eb2532ac6a7609106a04abf02ef4c5aa976a1402b659c85fb2f34d85ac

Download .SIGN

File Format: Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.

File Name: Serial-ATA_Firmware_48JFX_WN32_DL05_X03.EXE

File size: 9.32 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 3a45779d803190c791c6d8267f27455f

SHA1: 41732f45d5e2214b3c159e3742e36ce1a0376188

SHA-256: e9df450f3f7c84c8c652232da92eaf946160806005d57531950cc57c27c134bb

Download .EXE

File Format: Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.

File Name: Serial-ATA_Firmware_48JFX_LN_DL05_X03.BIN

File size: 9.3 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: e4c22413b715cd4446d24e6090cb4f02

SHA1: 9800395fae4291b9c0a35539d2671101ce9221ce

SHA-256: c741263effee9f4ccd874ab1a960d769601e1db24cfc263341f241635babee94

Download .BIN

Fixes & Enhancements

'-Resolved several cases where drive appears to be 8MB (ASSERT condition)
-Resolved TRIM command handling issues
-Resolved drive enumeration failure upon simultaneous occurrence of a NAND defect and a PLI event
-Performance enhancement for read/write/verify
-Limit SCT customization command execution to 100 cycles
-Resolved drive's being unresponsive on an out-of-range NCQ command
-DST short reports correct status when interrupted by power cycle

Important Information

This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.

This update will run on drives remaining in a RAID set that is in a Offline state.

There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.

Compatible Systems

Supported Operating Systems

Novell SuSE Linux ES 11

Windows Server 2008 x64

Red Hat® Ent Linux 4.5

Red Hat® Ent Linux 4.6

SuSE Linux ES 9

Suse Linux ES 9

Suse Linux ES 10

Red Hat® Enterprise Linux 4.5

Windows Server 2012

Red Hat® Ent Linux 4.7

Red Hat® Ent Linux 5.2

Red Hat® Enterprise Linux 6

Red Hat® Ent Linux 5

Novell SuSE Linux ES 10

Windows Server 2012 R2

Windows Server 2008 x86

Windows Server 2003

Windows Server 2008 R2

Windows Server 2003 x64

Installation instructions

1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.

Installation

1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.