Dell OptiPlex 3060 System BIOS

Restart required

Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

hi testing

Driver Id : 5KM2M

Importance : Critical

Version : 1.4.2, 1.4.2 Latest version Recommended version Latest and Recommended version

Release Date : 05 Jul 2019

Download Type : System BIOS

Category : BIOS

This package contains the Dell system BIOS updated. It is supported on Dell OptiPlex 3060 Tower, OptiPlex 3060 Small Form Factor, and OptiPlex 3060 Micro systems that run the Windows operating system. BIOS is a firmware that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Intel security advisories INTEL-SA-00233 and INTEL-SA-00213. A security advisory is a statement when a product is impacted by a security vulnerability and a remedy is available.

Download Files

File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.

File Name: OptiPlex_3060_1.4.2.exe

File size: 14.48 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: d102c8035182a2b20e19c08c96cbbbbe

SHA1: 7d1f5619a05602fa93dd8b376c312ec453c005e0

SHA-256: 7f7921dcdd842525e8701e238b523a70b93149c1a32e8c30cb90c6790f99e4ac

Download .EXE

Fixes & Enhancements

Fixes:
- Removed the pre-boot Intel RST Manager Optimized Defaults option.
- Firmware updates to address security advisories INTEL-SA-00233 (CVE-2018-12126, CVE-2018-12127, CVE-2018-12130 and CVE-2019-11091)
- Firmware updates to address security advisory INTEL-SA-00213 (CVE-2019-0090, CVE-2019-0086, CVE-2019-0091, CVE-2019-0092, CVE-2019-0093, CVE-2019-0094, CVE-2019-0096, CVE-2019-0097, CVE-2019-0098, CVE-2019-0153 and CVE-2019-0170)
- Fixed the issue where the audio driver cannot be installed completely when the internal speaker is disabled in BIOS.
- Fixed the issue where the thermal value is displayed incorrectly in ePSA thermal page.

Enhancements:
- Added a warning message to avoid updating BIOS when BitLocker does not finish its encryption.
- Improved Dell BIOS update utility for BitLocker suspension.

Installation instructions

Updating the BIOS from Windows

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.

Download and Installation
1. Click Download File, to download the file.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file and double-click the new file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from BIOS Boot Menu (independent of operating system)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.

Installation
1. Copy the downloaded file to a USB drive. The USB drive does not need to be bootable device.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click Ok.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a progress bar at the Dell logo screen. The system restarts again when the update is complete.

Dell OptiPlex 3060 System BIOS

Download Files

Fixes & Enhancements

Important Information

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to