Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: Insprion_3452_4.0.9.EXE
File size: 5.15 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 3f2f4060c0a71e9d6a7c29a4e37c504e
SHA1: e35480dc7e53d0c8f339b70682b1300034e0a9cd
SHA-256: 9103b32afda50ec741f64e02c5d377a8d2c3616f3cdefdd7751dd6bc13c0372b
Fixes & Enhancements
Fixes:
-.Update USB phy value for D-stepping CPU.
-.Update EC version to 0W.ISBS.EV.16.
Enhancements
-Not Applicable
Supported Operating Systems
Installation instructions
BIOS Update Executable for Windows/DOS
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if UEFI Boot Mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to General > Boot Sequence > Boot List Option
3. Change UEFI to Legacy of Boot List Option
4. Click Apply, Exit to save changes and reboot system.
5. Press F12, then Select USB Storage Device and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot.
8. Go to BIOS Setup by pressing F2 and go to General > Boot Sequence > Boot List Option
9. Change Legacy to UEFI Boot Option.
10. Click Apply, Exit to save changes and reboot system
--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system. If you don't enable BitLocker on your system you can ignore it.
Reboot will be required