Dell Remote Assistant Card II (DRAC II), v. 2.4, A01

Note: You will need a 3 1/2 inch floppy diskette for the following
procedure.
1. Download the file to a directory on your hard drive. The file
downloaded is a self extracting executable.
2.Double click on the file icon to run the executable.
3.Click on the setup button.
4.Follow the instructions to create the firmware update diskette.
5.Insert the diskette into the managed node server where the DRAC II is
located.
6.Restart the managed node server with the firmware diskette inserted in
the diskette drive. The server will boot to the diskette and flash the
DRAC firmware. Do not interrupt the firmware flash process once it begins.
7. The flash process will end after the flash is verified and the console
will return to a DOS prompt. Remove the diskette and restart the server.