Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: OptiPlex_9030_AIO_A21.exe
File size: 9.49 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 6b5061a2a65a67c45435cad053d48a63
SHA1: 2984c1ace6caa0cd802b08ba5cc80bbd63c1e80d
SHA-256: d0cc271120ca0c0ad79652750a169adbf0b48a43e6687c1ea96e8fd0b7c42211
Fixes & Enhancements
Fixes:
- Updated Intel ME Firmware to address security advisories INTEL-SA-00141 (CVE-2018-3616).
- Fixed a potential issue where the system stops responding when an incorrectly formatted password is entered at the BIOS Security Manager (BIOS preboot password) prompt.
- Added BIOS Password Feature: Master Password Lockout.
Enhancements:
- N/A
Supported Operating Systems
Installation instructions
Updating the BIOS through Windows
1. Click Download File, to download the file.
2. When the File Download window is displayed, click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file and double-click the new file.
Windows System restarts automatically and updates BIOS at the system startup screen.
After BIOS update is completed, system will reboot automatically to take effect.
Updating the BIOS from a DOS environment with Legacy boot mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then Press F12 key and Select USB Storage Device and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable file is located.
DOS System restarts automatically and updates BIOS at system startup screen.
After BIOS update is completed, system will reboot automatically to take effect.
Updating the BIOS from a DOS environment with UEFI boot mode (Non-Windows users, Load Legacy Option Disabled)
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then go to BIOS Setup by pressing F2 key and go to General > Boot Sequence > Boot > Boot List Option.
3. Change UEFI to Legacy of Boot List Option.
4. Go to Exit > Save Changes and reboot system.
5. Press F12 and then Select USB Storage Device and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable file is located.
DOS System restarts automatically and updates BIOS at system startup screen.
After the BIOS update is finished, system will reboot automatically.
7. Go to BIOS Setup by pressing F2 key and go to General > Boot Sequence > Boot > Boot List Option.
8. Change Legacy to UEFI Boot Option.
9. Go to Exit > Save Changes and reboot system.
Note 1: You must provide a bootable DOS USB drive. This executable file does not create the DOS system files.
Note 2: Ensure that you suspend BitLocker encryption before updating BIOS on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step.