Download Files
File Format: Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
File Name: Intel-HHHL-PCIe-Solid-State-Drive-Driver_TKTW0_WIN_1.8.0.1011_A00.EXE
File size: 9.37 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: a6f56b5d3782bc2518c59b09927addeb
SHA1: fc9636294f4233d8de6c33477a0ef3c3495ec3e3
SHA-256: 8d318537a1fd28a1a4cbdf39cae94a0fd0f1471b8199215dc5704aff47b5667e
Important Information
WARNING: As with all driver updates, it is strongly recommended that you backup or make copies of all important files before performing this update. This driver update process is done entirely at your own risk. If performed correctly, there will be no loss of system or user data on the drive. However, if the driver process is interrupted for any reason, your solid state drive may not function properly.
Supported Operating Systems
Windows 7, 32-bit
Windows 7, 64-bit
Windows 8, 32-bit
Windows 8, 64-bit
Windows 8.1, 32-bit
Windows 8.1, 64-bit
Windows 10, 32-bit
Windows 10, 64-bit
Installation instructions
Download
1. Click Download File and follow the remaining prompts to download the file.
2. When the File Download window appears, click Run to unzip the download package into your hard drive.
3. The file explorer will open pointing to the directory containing the download package. Please take note of the path.
------------------------------------------------------------------------------------------
The driver can be installed in either of the following two ways:
1. Using the SetupNVME.exe installer, the automated method that will install the driver files for you.
2. Using the Have-Disk command set up requires the user to go into the system's Device Manager and install the driver for the new PCIe* device.
------------------------------------------------------------------------------------------
Driver upgrade through the Windows utility
Procedure
1. Double-click the installer ICON in the directory. Once launched, the Setup screen will appear.
2. Click Next to continue.
3. At the License Agreement, review and accept the terms.
4. At the Confirm Screen, click Next to continue.
5. At the Windows Security screen, click Install to start the installation process.
6. At the Completion screen, click Finish to close the installer program.
At this time you can assign the drive a letter from disk manager.
------------------------------------------------------------------------------------------
Driver upgrade through the Device Manager
Procedure
1. Log into Microsoft Windows and initiate Device Manager:
Computer Management > Device Manager
The Device Manager displays a list of the hardware in the system. Any device that does not have a driver installed will show up with a caution notification.
2. Right-click on the PCI Device and select Properties.
3. Select the Details tab.
4. Select the Property drop-down box to view the Hardware Ids.
Device should show VEN ID = 8086 and DEV = 0953
5. Once the correct device is known, right-click to select the device and select Update Driver Software.
From the Update Driver Software window, you will direct the system to the appropriate location.
6. Select Browse my computer for driver software to begin installation.
Installation will begin and the Windows Security confirmation will be displayed.
7. Click Install.
*.Installation Instructions:
For the detail usage of this package, Please refer to the attached Update Tool Manual or visit https://www.intel.com/content/dam/support/us/en/documents/ssdc/data-center-ssds/Intel%20NVMe%20Install%20Guide_330547-003.pdf
Applies to
INTEL 750 1.2TB HHHL PCIE SSD