Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: AW18A02.exe
File size: 10.79 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: cccc723150ddd299538c93759368bfac
SHA1: f1d114bd46e4863f5680d2e344e94b31e665d33a
SHA-256: 758326aa803d1debb3dbbe4669aaa15b2ba84bbb438f0ba59b45fb7b0606e89f
Fixes & Enhancements
[BIOS]
1. Update Intel GOP 5.0.1032.
2. Update Intel VBIOS 2175.
3. Modify load default behavior in Setup Menu.
4. Enhance secure boot function.
5. Enhance Panel information interface.
6. Update Microcode 306C3h Rev.09h.
7. Add New ROM part support.
8. Disable WLAN ASPM L0s.
9. Modify SATA configuration behavior for tool load default.
10. Add CMFC OEM Project Function.
Supported Operating Systems
Installation instructions
[Run the BIOS update utility from Windows environment]
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
[Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
[Run the BIOS update utility from DOS environment if UEFI Boot Mode (Non-Windows users,Load Legacy Option ROM Disabled)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option"
3. Change "UEFI" to "Legacy" of Boot List Option
4. Go to "Exit > Exit Save Changes" and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot.
8. Go to BIOS Setup by pressing pressing F2 and go to "Boot > Boot List Option"
9. Change "Legacy" to "UEFI" Boot Option.
10. Load Legacy Option ROM->Enabled
11. Go to "Exit" > Exit Save Changes and reboot system
Reboot will be required
Applies to
Dell Alienware 18 System BIOS