Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: Wyse_5070_1.1.3.exe
File size: 8.1 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: e7b958ff9b56e3201362d6aaf7f196b4
SHA1: ca5c832bd2b7c4c3ab0bf3ccadbceec13ae3483a
SHA-256: 60d31e73a08f7dc9f26bcd11e730db7a2d8e3c009f68e926a95d1fc7ec6207c6
Fixes & Enhancements
Fixes:
- Fixed a potential system hang issue when an incorrectly formatted password is entered at the BIOS Security Manager (BIOS pre-boot password) prompt.
- Fixed a potential issue with binary image measurement using the Linux UEFI shim boot loader.
- Fixed the TPM configuration on a TPM startup error during S3 resume.
Enhancements:
- Update Intel Micro-code Firmware for system stability.
- Support USB Type-C Power Delivery Firmware update capability through BIOS.
Important Information
Do NOT power off the system until the process of updating(flashing) BIOS has been done.
Supported Operating Systems
Installation instructions
BIOS Update Executable for Wyse 5070 Thin Client System
Download
1. Click "Download File", to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Perform the BIOS update from the BIOS Boot Menu, independent of operating system.
1. Copy the downloaded file to a USB flash device. It does not need to be bootable.
2. Insert the USB flash device into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one time boot menu.
5. Select "BIOS Flash Update" in the "Other Options" section.
6. Click on the "..." button to browse the USB flash device to locate the downloaded file.
7. Select the file and click "Ok"
8. Confirm the Existing System BIOS Information and the BIOS Update Information are as expected.
9. Click "Begin Flash Update"
10. Reviewing the Warning message and click "Yes" to proceed with the update.
11. The system should restart and show a Flash Progress bar on the Dell logo screen as the BIOS update is being performed.
12. The system will restart once again when the Flash update is complete.
==============================================================
Note: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it
Applies to
Dell Wyse 5070 Thin Client