LSI Logic PERC 4/Di, v.2.37, A13

hi testing

Driver Id : 9010G

Importance : Optional

Version : 2.37, A13 Latest version Recommended version Latest and Recommended version

Release Date : 28 Aug 2003

Download Type : Firmware

Category : SCSI RAID

Dell PowerEdge 2600, PowerVault 770N PowerEdge RAID Controller 4/Di Firmware Update

Version: 2.37

Date: 7/01/03

Download Files

File Format: Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.

File Name: RAID-FRMW-R63812.exe

File size: 1.78 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: FE30927D9072C3E316A561F1A2E6AC12

Download .EXE

File Format: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.

File Name: PERC4Di-FW237-PE2600.exe

File size: 1013.31 KB

Download .EXE

Fixes & Enhancements

Firmware Enhancements

None

Firmware Bug Fixes

1) Fixed Blue screen due to a misbehaving drives.

2) Changed the request sense length to 0x10 from 0x12. This was owing to CRC errors on Seagate drives.

3) Fixed issue where misbehaving drive would cause the system to hang.

4) Fixed NVRAM issue related to downgrading firmware.

5) Fixed issue where BGI would run during an NVRAM mismatch.

6) Sense Info pointer now increments correctly.

7) Fixed issue where rebuild might not restart after reboot.

8) Added fix for the firmware to keep checking for hot spare if the first rebuild fails.

9) Fixed a problem where the firmware would continuously respond to an auto request sense failure from a failing hard drive.

10) Fixed a conflict with Direct I/O, No Read-Ahead, and Write-Through cache parameters and platforms with more than 4 GB of system memory.

BIOS Changes

None

Ctrl-M Changes

None

WebBIOS changes

None

Installation instructions

Custom Instructions for PERC4Di-FW237-PE2600.exe:

Note: In order to create this diskette, the file must be downloaded to and executed on a system running Microsoft Windows.

Download

1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.

Diskette Creation

1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set.
2. Insert a blank diskette then click Continue.
3. When prompted, repeat step 2 until you reach the end of the diskette set. Label each diskette with a disk number starting from 1.
4. After all the files have been copied to the last diskette, click Finish.

Installation

1. Insert the first created diskette into the target system.
2. Reboot the system.
3. Follow the onscreen instructions.
4. Remove the diskette and reboot system

Dell Update Package Instructions for RAID-FRMW-R63812.exe:

Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.

LSI Logic PERC 4/Di, v.2.37, A13

Download Files

Fixes & Enhancements

Compatible Systems

Supported Operating Systems

Installation instructions