Dell EMC Networking N2000 Series Firmware Version 6.6.0.13

Restart required
Driver Id : 27P30
Importance : Recommended
Version : 6.6.0.13, A03 Latest version Recommended version Latest and Recommended version
Release Date : 03 Dec 2019
Download Type : Firmware
Category : Network, Ethernet & Wireless
If N2000 series switch has an earlier version of firmware (6.0.0.7 or 6.0.0.8 or 6.0.1.3), upgrade switch to the latest version of firmware 6.6.0.10 as it contains multiple bug fixes.

New CPLD version 20 is available in release 6.5.1.1 and later (6.6.0.13) for N2000 Series switches. After upgrading the switches to FW version 6.5.1.1 and later (6.6.0.13), the CPLD can be updated to version 20 from CLI using the command - "update cpld". To update CPLD on stack members, run - 'update cpld ' command from stack master. Please DO NOT power-cycle the switch when CPLD update is in progress. After CPLD update is complete, the switch will reset on it's own. Verify CPLD Version with the command - 'show version' from CLI after switch boot-up completes.

****Below information is applicable ONLY for N2000 switches upgraded to 6.6.0.13 and CPLD Version 15 or 17 or 20 and attempt to downgrade to any prior FW version****

Downgrading N3000 and N2000 Series switches from firmware version 6.6.0.13 with the updated CPLD version 15 or 17 or 20 (Verify CPLD Version with the command “show version” from CLI) to any prior 6.x.x.x version can ONLY be done by downgrading via interim FW version B.6.3.2(N3000_N2000vB.6.3.2.stk) attached to zip file.

With interim FW image version B.6.3.2 running, the switches should be downgraded to CPLD version 13 first before downgrading to any 6.x.x.x version. Please follow the instructions documented in the “Firmware Downgrade” section of "Upgrading Dell EMC Networking N2000 Series Switches From Version 6.x.x.x to 6.6.0.13" procedure.

Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell_EMC_Networking_6.6.0.13_6.6.0.43_ReleaseNotes_N1100_N1500_N2000_N2128PX_N3000E_N3132PX.pdf"

Download Files

File Format: This file format contains plain text which can be viewed with a standard text editor.
File Name: N2000ReadMev6.6.0.13.A03.txt
File size: 4.06 KB
To ensure the integrity of your download, please verify the checksum value.
MD5: 52bfca64c5ccaa644f49c59dc44c29b2
SHA1: c5eafdbba91e0c1ac24c2052beb7c042c792d0a0
SHA-256: ebd6df6f8b2bfd47789808a9dc24783b04c2fbbbff621cd360626b587c5fd006
Download .TXT
File Format: This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
File Name: N2000v6.6.0.13.A03.zip
File size: 179.05 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: c48b66bbd3947362638070a5efaac6f3
SHA1: 75f8be97bb4803db5eee7c91452f81ffd9a9e9e7
SHA-256: 1dcce0dcdb513536010f5e491c00c3daac4b787627cf01ece72c24ad37f51050
Download .ZIP